Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Urban Salvaged Hardwood Slabs, Milled In-House from Rare Trees. Shop Unique Walnut Stock.

Ash Hollow Form 5301

Posts

Ash Hollow Form 5301

#1

Ash Hollow Form 5301

Bruce Forrest

>This ash hollow form measures about 9 inches tall. It is a variation on the last one I posted. Comments welcome.


img

Re: Ash Hollow Form 5301

#2

Re: Ash Hollow Form 5301

Cyril Griesbach

>I really like this, Bruce. I especially like the form within a form look of it, and the way the grain pattern from the fluted to non fluted sections give the illusion of the grain being at 90 degrees to one anotherr.

Re: Ash Hollow Form 5301

#3

Re: Ash Hollow Form 5301

Bill Clark

>Nice piece Bruce. I really like the form and stoped fluting. Very nice design. How are you cutting the flutes? By carving or indexed with a router and jig?

Re: Ash Hollow Form 5301

#4

Re: Ash Hollow Form 5301

Bruce Forrest

>Thanks for the comments. The flutes are started with router and jig (to establish position and depth) and are then finished off with microplane rasps and/or Kutzalls on a heavy duty flex shaft. Followed by sanding, of course.

Re: Ash Hollow Form 5301

#5

Re: Ash Hollow Form 5301

George Van

>Bruce, I always enjoy seeing your black ash vessels, this one is no exception. Your exploration of the flutes is an interesting study looking back at your first to the present. I find it particularly interesting as I also live in the �small growth ring� black ash territory and these work very well for this effect. If the growth rings were wide the flow would be different.

You mention the heavy duty flex shaft, do you drive this with a 1725 or 3450 rpm motor? The heavy duty ones I have seen are �� shafts. I have been looking at Lee Valley and Woodworker�s Supply.

Re: Ash Hollow Form 5301

#6

Re: Ash Hollow Form 5301

Bruce Forrest

>The flex shaft that I have was from Lee Valley. I've been running it powered by an electric drill locked on high. I think that runs at about 4000.

Re: Ash Hollow Form 5301

#7

Re: Ash Hollow Form 5301

George Van

>Thanks Bruce, I never thought of a drill ;-)!

Re: Ash Hollow Form 5301

#8

Re: Ash Hollow Form 5301

eaglesc

>I like this much better than the dyes ones.

The fluting accentuates the grain which is lost in the other piece.

The other one looked like it was salvaged after a fire.

This one is truly beautiful.