Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Want Better Milling & Firewood Knowledge?

Vicmarc V belt

Posts

Vicmarc V belt

#1

Vicmarc V belt

Mike Cunningham (Cape May NJ)

>I'm remounting a VL100 onto a home built stand and need a longer V belt. The lathe has grooved sheaths, I need a J section 2 groove V belt in the neighborhood of 42" long. I've searched the internet (The usual places such as MSC, etc) and locally and haven't been able to locate one. Any help would be appreciated.

Thanks

Mike

Re: Vicmarc V belt

#2

Re: Vicmarc V belt

john lucas

>Mike When I went looking for a longer belt couldn't find the 3 groove belt that I needed. They could get me a 6 groove. I simply split it down the middle with a razor blade and then had a spare. I got it at my local bearing and screw supply house.

Re: Vicmarc V belt

#3

Re: Vicmarc V belt *LINK*

Mike Cunningham (Cape May NJ)

>Thanks John that's an excellent suggestion and one that I'll keep in mind for the future. However, just after posting here I searched for companies by using "Leeson motors" and then searched the company for the needed belt. Turns out E B Atmus handles them and don't require you to order a gross, one or two is fine and the price is right. I included the link for anyone looking for odd belts.

Mike


Atmus