Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Fast and affordable laser cutting – so you can make the parts you can’t find anywhere else

Looking for some feedback

Posts

Looking for some feedback

#1

Looking for some feedback

Steven Kubien

>Afternoon everyone,

Does anyone here have a Stihl MS390? Care to share your thoughts on this saw? Good? Bad? Indifferent?

Thanks,

Steve Kubien

-who is shopping with Christmas cash from SWMBO. Gotta love 'er!

Re: Looking for some feedback

#2

Re: Looking for some feedback

Bruce McElhaney, Spring Lake, Michigan

>While I don't have one, I have a 260. I understand the 390 is basically a tweaked 290 with more power and a compression release. It should be a great saw with top of the line power to weight ratios. My neighbor has a 290 Farm Boss and it's a fine saw. I've used it on occasion. It's a bit heavier than my 260, but with a bit more power. The 290 is still a lot of bang for the buck, but if money is not a problem, go with the 390.

Re: Looking for some feedback

#3

Re: Looking for some feedback *LINK*

JohnKJordan in East TN

>Steven,

I have the MS 361 which is similar but a little lighter and smaller in displacement (59.0cc vs 64,1cc). I bought it to complement my MS 250, mounting a 24" bar for those times when I got into bigger wood.

The 361 and 390 use the same chain, both have compression release, and both have nearly the identical power. The 361 has a larger capacity fuel tank.

I can say this, the 361 is a lot of saw. It's pretty heavy and the 390 is even heavier. The 361 has an amazing amount of power. Unless you are a pretty big person, the 390 may be more saw than needed.

I do notice Stihl lists the 390 in the Mid-Range Use catagory and the 361 is in the Professional Use list, but I don't know exactly what that means. Stihl claims "increased durability" which may not matter for occasional use.

JKJ


Stihl comparison chart

Re: Looking for some feedback

#4

Re: Looking for some feedback

Steven Kubien

>Thanks for that John. It looks like I am making the right decision, I think.

Steve Kubien

Re: Looking for some feedback

#5

Re: Looking for some feedback

Steven Kubien

>Hey Bruce,

Thanks for the feedback. The other Stihl I am looking at is a MS290 so thanks for the info.

Steve Kubien

Re: Looking for some feedback

#6

Re: Looking for some feedback

Barry Irby

>I have an MS 390 I bought about two years ago. Used it to cut enough trees to saw up about 5000BF of walnut and cherry. Since then it only gets occasional use.

I like it and would buy it again. Don't know what else to say.

Re: Looking for some feedback

#7

Re: Looking for some feedback

Steven Kubien

>That says it all. Thanks.

Steve

Re: Looking for some feedback

#8

I sure do...

Peter Teubel

>...with 20" and 28" bars. Great saw. I used a friend's 290 for a week and love it so much I decided to get one myself. When researching the specs, I found the 390 has the SAME weight as the 290...but more power. Nuf said. The rest is history. Not cheap but (IMO) worth every penny.

Re: Looking for some feedback

#9

Re: I sure do...

Steven Kubien

>From everyone's comments (inlcuding yours Peter) it looks like I am picking a winner. Next Friday...Next Friday...Next Friday....

Steve Kubien

Re: Looking for some feedback

#10

Re: I sure do...

Peter Teubel

>FYI: You can get better-than-dealer pricing on Stihl brand chains on eBay. Personally, I use the 33RS (yellow non-safety) chains exclusively on the 390. I find they cut better than the 33RSC or 33RSC3 (green safety). I get them from "LCB Saw Chains and More" on eBay.