Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Premium Live Edge Slabs, Hand-Selected in the Berkshires. Shop Unique Hardwood Pieces.

Been a busy few weeks 2

Posts

Been a busy few weeks 2

#1

Paul Kramer

Been a busy few weeks 2

Paul Kramer

>The other ornament -- after practicing on the secret Santa gift I was able to work on the one for LOML.


img

Re: Been a busy few weeks 2

#2

Re: Been a busy few weeks 2

Juergen

>If you want to add additional interest turn something on the top of the bottom finial, drill an appropriate size hole in the ornament globe bottom and glue together. See attached photo.


img

Re: Been a busy few weeks 2

#3

Re: Been a busy few weeks 2

Steven Kubien

>I really like this one!

Steve Kubien

Re: Been a busy few weeks 2

#4

Paul Kramer

Re: Been a busy few weeks 2

Paul Kramer

>Thanks Steve and Juergen,

I only made a 1/4" hole for the turning mandrel and I was a little skittish about drilling it any bigger. The central 'sphere' was just too delicate for me to try it. I just realized I forgot to mention that the woods (from the top) are Osage orange, Cherry, and figured Hard Maple.

Re: Been a busy few weeks 2

#5

Re: Been a busy few weeks 2

Juergen

>I drill the large holes with a SHARP forstner bit. Make sure to accurately mark a precisely cut and square blank for the large hole center points. The same is true for the small finial holes on the top and bottom. The advantage of this method is the turning is now centered when the blank is mounded between center on the finial holes. Remember to sand the insides of the large hole before turning the outside shape. Good Luck