Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Abingdon, VA – Tree Cutting & Portable Sawmill

Lathe Drive Belt Trouble

Posts

Lathe Drive Belt Trouble

#1

Paul Kramer

Lathe Drive Belt Trouble

Paul Kramer

>All,

While trying to complete some turned Christmas gifts my Delta Midi (Mini really) began vibrating. Upon investigation I found that the belt had a little twist in it. I was on dead-line so I soldiered on. The vibration became worse and soon after the belt jumped off the pulley and it was evident that it wasn't going back on -- see photo below. I called Delta and I was told that the belt was a "consumable" so it wasn't something they covered. So, I ordered the belt off their site. It arrived a few days later and it looked completely different. Instead of the clear base material with white strands the new one was black and there was no evidence of any threads. The new one works well and I was able to get back to work in time -- see the following posts.

Have any of you seen this? I've never heard of it and I'm suspicious that it's a failure of design or manufacture.

Paul


img

Re: Lathe Drive Belt Trouble

#2

Re: Lathe Drive Belt Trouble

TomCollins

>I had exactly the same problem and heard from another Delta owner who had similar simptoms. I ordered a belt from an aftermarket supplier since Delta wanted something like $17 not including shipping and their web site said it was on indefinite back order. I paid around $8 including shipping. My machine is smooth and quiet now.

TomCollins

Re: Lathe Drive Belt Trouble

#3

Paul Kramer

Re: Lathe Drive Belt Trouble

Paul Kramer

>Tom,

Where did you get your belt? The shipping from Delta was exorbitant. So, I ordered two. I'll probably never need the other one.

Re: Lathe Drive Belt Trouble

#4

Re: Lathe Drive Belt Trouble

Carol - now in NC Nebraska

>Belts for Everything has been real helpful for me.