Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

A55 Smoothing Plane

Knurled Knob

Posts

Re: Knurled Knob

#2

Re: Knurled Knob

David Churnega

>Some additional information needed please:

Is that a home-made faceplate attachment?

Is the inside of the knurled knob threaded?

I cannot get a chuck for my lathe as it has a unique thread pattern and am exploring things people do to hold work.

Re: Knurled Knob

#3

Re: Knurled Knob

john lucas

>David Contact Vic at Bestwoodtools. He can make just about anything so he might be able to build an adaptor for your lathe.

Re: Knurled Knob

#4

Re: Knurled Knob

john lucas

>I'm dying to know how you knurled it. I have a knurling tool for my metal lathe but haven't tried it on the wood lathe.

Re: Knurled Knob

#5

Re: Knurled Knob

Donna Banfield

>David, the wood behind the knurled knob is the homemade handwheel on the outboard side of my headstock. The knob holds the threaded rod drawbar for the Beale Extension (see photo in previous posting).

Re: Knurled Knob

#6

Re: Knurled Knob

Donna Banfield

>John, I'm not exactly sure how Mike Green made the knurled knob; I know that the tool/attachment for his metal lathe does it, and he has a blast using it!

I have the Sorby Spiraling/Texturing cutters, and know that one of them can do that same thing in wood, but I have not tried it yet.