Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Nearly 100 Exotic Wood Species, Direct-Imported Since 1972. Shop Slabs & Turning Stock.

What you can do with a metal lathe

Posts

What you can do with a metal lathe

#1

What you can do with a metal lathe

Donna Banfield

>I am very fortunate to have a good friend, Mike, who is a gifted woodturner and very creative on his metal lathe.

If you've ever used the Beale Buffing wheels on a deep bowl, especially if it has a natural edge, the headstock of your lathe frequently gets in the way.

This device solves that problem. Mike turned a new arbor with a #2 MT, that extends 10" from the headstock, and accepts the wheels and bowl buffs. To hold it in place, he created a drawbar, made from threaded rod that screws into the back part of the new arbor, passes through the headstock, and is secured with the knurled knob. The knob was made to fit snuggly into my handwheel. Even at 1800 rpm, there is no vibration or runout at the buff end.

Don't ask me how he made this -- I'm clueless. But am grateful to be a lucky recipient of his work.


img

Re: What you can do with a metal lathe

#2

Re: What you can do with a metal lathe

john lucas

>Craft Supplies sells a Long Buffing Adaptor that is 8". It screws on the threads. I bought one when they first came out because I was having the same problems you have when buffing bowls.

Re: What you can do with a metal lathe

#3

Re: What you can do with a metal lathe

Donna Banfield

>John, I saw the Craft Supplies buffing adapter a while back, and it was certainly on my list of things to eventually acquire. Now I don't have to.

Funny thing is, the guy that made this, Mike Green, spends HUGE amounts of time on his metal lathe figuring out how to make this stuff. We tease him about using the equivalent of a steel highway girder to make a ten penney nail, just because he has the tools to do it.

But I'm happy that he has the ability to make it and share the stuff with me.

Re: What you can do with a metal lathe

#4

Steven Antonucci

Machinist tolerances-

steve antonucci

>It takes a special kind of person to work in thousandths of an inch...

Looks like an excellent piece of workmanship. I like the big Knurled knob, since it seems there are enough tools stuck to most lathes. Being able to remove it with only one hand, and then tap out the morse taper with a knockout bar probably makes for quick changes.

Not trying to rain on anyone's parade, but does that kind of tolerance matter on a buffing wheel where the wheel may be deflecting an inch? I made mind out of a piece of wood that I hold in my chuck jaws, but it's only a few inches long...

Steven

Re: What you can do with a metal lathe

#5

Re: What you can do with a metal lathe

john lucas

>wow-he sounds just like me. I bought a $1000 dollar lathe and mill and so far I've made about $200 worth of tools. It reminds me I ran into our school interpreter while shopping the other day and she said she'll go home and tell her husband she saved 40%. He will tell her she cold have saved 100%. :)

Re: What you can do with a metal lathe

#6

Of course it matters.....

Barry Irby

>Tolerances always matter. Why do you think schools have a Zero Tolerance Policy? If Zero Tolerance is that important imagine how important thousandths are.

Steve, you will have to go back and make yours again. Out of stainless steel or at least Iron Wood. If you get a buffing wheel off by a few thousandths you will get the tire track effect on anything you are buffing. If you don't believe me, send the next piece you make and buff on that lop sided system you have now to John Lucas or better yet to EagleSC and they can photograph it at F-1.38.9 under a blue green laser light (65000 degrees K) using the mega pixel attachment and show you the error of your ways. Just because you need an electron microscope to see it does not mean he mistakes are not there.

Thank goodness metal workers can still do work at that level.

Re: What you can do with a metal lathe

#7

Re: What you can do with a metal lathe

Doug Thompson near Cleveland

>Donna, you are lucky to recieve this gift, it does take a lot of skill and knowledge to machine a MT.

John, wait to you see the new (old) lathe I bought the other day. I was going to convert a standard lathe but found a custom made production CNC lathe just a little bit larger than your PM. Get this... $399 it only needs a chuck and a new control so it runs off 110 and I'll build that.

Re: What you can do with a metal lathe

#8

Re: What you can do with a metal lathe

Chuck Engstrom

>Looks like your friend could sell a few of these if he had a mind to make them in quantity.

Best--

Chuck Engstrom

Re: What you can do with a metal lathe

#9

Re: What you can do with a metal lathe

john lucas

>Doug What a price, I'm jelous. Well sort of. I have so many problems with computers I would probably destroy a CNC machine but I sure would like to try one. I think it's kind of like woodworking. I learned on machines but didn't really "learn" until I started working with hand tools. I probably should learn to do everything the old fashioned way with metal tools before I go to the CNC.

Re: What you can do with a metal lathe

#10

Re: What you can do with a metal lathe

Donna Banfield

>He could,Chuck, but he won't. If he started making them for sale, rather than for fun, it wouldn't be fun any more. They would become "Have to's" instead of "Want to's".