Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Need a tree taken down or milled?

Lamps

Posts

Lamps

#1

Lamps

Jorge Castaneda~Downeast Maine

>Here are the lamps my family got for Christmas.

Bases are acer macrophilia (?) and stems acer sacharum, both curly.

It was a full and fun day at the lathe.

Thanks for looking

Jorge


img

Re: Lamps

#2

Re: Lamps

Jorge Castaneda~Downeast Maine

>Here is a close up of one


img

Re: Lamps

#3

Re: Lamps

Jorge Castaneda~Downeast Maine

>And another one, this made of osage orange, the base a piece given to me by Allen Neighbors and the stem from Crafts USA, although both are osage orange, they look different, both very hard.

Thanks for looking

Jorge


img

Re: Lamps

#4

What great gifts!

Jennifer@Indy.USA

>Jorge, these are all great! I love them. I really like the shapes of the stems and the nice rounded bases. Isn't it fun to give your family hand made gifts? We've been doing that among my family for quite a while now. We exchange our hand mades on Christmas Eve. It's really a fun time. I bet the recipients of these lamps were just thrilled! Thanks for sharing them.

Jen

Re: Lamps

#5

Re: Lamps

Barbara Gill, Remlik VA

>Nice Jorge. Did you drill the bases? I bought a lamp auger years ago but never tried it.

Re: Lamps

#6

Re: What great gifts!

Jorge Castaneda~Downeast Maine

>Hi Jen,

Thanks, yes I grew in a family where gifts were made, never bought and I am trying to pass that down to my girls. It is a lot more fun.

Jorge

Re: Lamps

#7

Re: Lamps

Jorge Castaneda~Downeast Maine

>Hi Barbara,

Thanks. Yes I did drill both stems and bases, my lamp auger is 5/16" and the lamp rod is 10mm, a smidgen over 3/8", so I drilled from both ends with a long brad point, not a very straight hole but good enough to run the wire. A fun project.

Jorge

Re: Lamps

#8

Re: Lamps

Jim Shaver Oakville, Ontario

>Hi Jorge,

Lovely work, special for your family as well.

Take care,

Jim

Re: Lamps

#9

Re: Lamps

john lucas

>Fun lamps. I always enjoy making them but don't make very many. I love your rounded bases.

Re: Lamps

#10

Re: Lamps

john lucas

>I have a 3/8" lamp auger but the lamp rod still won't go through. I usually cut short sections and jam 2 nuts together and then thread the rod in using a socket wrench and a little CA or epoxy on the rod.

If I want the rod to go all the way through I first drill with the lamp auger and then I drill from both ends off the lathe with a 1/2" drill. I drill from both ends. Then I mount the blank between some custom centers that I made for my drive and tail centers. That lines everything up.

Re: Lamps

#11

JL

Re: Sweet looking wood and a pretty lamp!

JL

>

Re: Lamps

#12

Thanks John!

Jorge Castaneda~Downeast Maine

>

Re: Lamps

#13

Thanks Jerome!

Jorge Castaneda~Downeast Maine

>

Re: Lamps

#14

Re: Lamps

Jorge Castaneda~Downeast Maine

>That is what I ended up doing, I held the rod with a rag round it in a vise grip and feed it until I stalled the lathe, the woods are so hard that I don't think they need any glue on the stems, for the base side I wriggle a 3/8" bit with a hand drill and here I used epoxy.

The most fun was taking my 1" Thompson skew for a serious spin, it cuts beautiful.

Re: Lamps

#15

Thanks Jim!

Jorge Castaneda~Downeast Maine

>

Re: Lamps

#16

Re: Lamps

Allen Neighbors

>Beautiful lamps, Jorge. I'll bet your family just loves to open your gifts! :) And these'll be passed on down for many many years.

Well done!

Re: Lamps

#17

Thanks Allen

Jorge Castaneda~Downeast Maine

>for the kind words and the WOOd!

jORGE