Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

200+ woodworking book reviews

Got 3 hrs. of turning time yesterday

Posts

Got 3 hrs. of turning time yesterday

#1

Got 3 hrs. of turning time yesterday

Eddie Pacheco, San Jose, Ca.

>After some family time and just before the big game I got some time on the lathe. Inspired by Colin's work and the examples at his website, I did a square platter out of some figured walnut. These are a bit scary and I did manage to get a chip out which I didn't clean up. I also made a small ort bowl out of Cocobolo. Both of these quickies are for my mother in law for coins and orts.

With the exemption of the foot tenon, I used the Hunter # 3 cutter from rough to finish on both of these pieces. I'm trying to get better at using these Hunter cutters. While not practical for production work, in roughing, I like the fact that one cutter, off the rack, can just about do it all.

The walnut piece was sanded to 320 (started at 220) and has a BLO finish.

No shop time today as we are having company again.


img

Re: Got 3 hrs. of turning time yesterday

#2

Small ort bowl

Eddie Pacheco, San Jose, Ca.

>Here's a pic. of the cocobolo ort bowl I turned. On this shot you can see the unsanded as cut finish from the #3 Hunter. I aparently held it in scraper mode. After reading Mike's post below I went back this morning and held the cutter at a different angle and indeed the surface cleaned up nicely. I didn't take a 2nd pic.a s I was getting the evil eye for not helping out in pre company cleanup. Relatives don't care if the house is a little untidy, right?


img

Re: Got 3 hrs. of turning time yesterday

#3

Steven Antonucci

That's a great piece of wood!

steve antonucci

>I love the way you chose to turn it. Square shows the waves much better than a circular bowl would have.

Steve

Re: Got 3 hrs. of turning time yesterday

#4

Mike Stafford

Re: Got 3 hrs. of turning time yesterday

Mike Stafford

>Both of your pieces are fine looking! The figure in the square walnut bowl is exceptional. Very nice piece. I love little ort bowls and so do the women.

I am glad you are enjoying the Hunter tools as much as I am. It has taken some practice for me to find the "sweet spot" but once you do the shavings just peel right off as slick as you please.

Re: Got 3 hrs. of turning time yesterday

#5

Re: Got 3 hrs. of turning time yesterday

Ken Oakley-Sunny St. Cloud, Fla.

>Hey Amigo, How's your FIL doing? And what the hell are orts? Never heard of them.

Re: Got 3 hrs. of turning time yesterday

#6

Re: Got 3 hrs. of turning time yesterday

John Veerkamp

>Orts are those annoying little snibblings of thread from various types of needle crafts, including knitting, quilting and lace making.

Re: Got 3 hrs. of turning time yesterday

#7

Re: Small ort bowl

Jennifer@Indy.USA

>I love the square bowl, Eddie. Sometimes just three hours is enough to bring us back to center and make the rest of the world disappear.

Jen

Re: Got 3 hrs. of turning time yesterday

#8

Thanks, Folks!

Eddie Pacheco; San Jose, Ca.

>I've only done one other square piece and that was from Zebrawood. I like doing them, but the threat of those spinning corners makes me wary of them. When I saw Colin's work I had to try another one.

Ken, Thanks for asking about my FIL. He is doing better, but the progress is going at his pace. He was never into exercise so getting his upper body and trunk muscles in shape is taking time. I think he can walk without a walker now, but he is waiting for a doctor or therapist to give him the green light. Grrrrrrr! The temporary walk-in shower conversion of the laundry room has been very helpful. In addition to the 3 grab rails in the stall, I have added coat hangers at various heights so that he can hang his towels, underclothes, and grabber gizmo. I'll take a picture of the setup. So far his bed setup in our family room/shop is working well. However, he is counting the days till he can fly back home to Pittsburgh.

And about our current medical insurance system?...If you get hurt make sure it is in your home state. Dealing with his out of state carrier, and the 3hr. time diff. has been a real hassle.

Re: Got 3 hrs. of turning time yesterday

#9

Re: Got 3 hrs. of turning time yesterday

Colin

>Eddie I am glad that I manages to inspire you. It is a great first attempt at a square bowl, I wish mine had been as good.