Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

VPS-Level Performance. Fully Managed. No Hassle.

My memory and my computer's memory have failed :-)

Posts

My memory and my computer's memory have failed :-)

#1

My memory and my computer's memory have failed :-)

Clem Wixted, Jonesboro, AR

>I recently saw a web page with instructions for making a TOOL HANDLE and I have spent a few hours searching for it on my computer and on the net, to no avail. I thought I saved the link or copied the article but maybe "old timers" is working against me.

This was no ordinary tool handle. It was made to slide a 1/2" tool into a metal handle and the tool was held in place with pipe and hydraulic fittings. If I remember correctly the tool was held in place using hand pressure to squeeze a compression fitting onto the tool shaft. The metal handle, I think it was black pipe, was covered with a reinforced hose that looked like it had mesh under the outside clear cover. I even think the author used something on each end of the handle to finish each end of the hose. It looked really good.

Can you point me to this article or web page.

Thanks,

Clem

Re: My memory and my computer's memory have failed :-)

#2

Re: My memory and my computer's memory have failed

Bill Noce

>I think what you are looking for is Doug Thompsons web site try this

www.thompsonlathetools.com

Bill

Re: My memory and my computer's memory have failed :-)

#3

Peter Charles Fagg (UK)

Re: My memory and my computer's memory have failed

Peter Charles Fagg (UK)

>Thats a good link and an interesting web site.

No excuse for not having the right handle!

Regards, Peter.

Re: My memory and my computer's memory have failed :-)

#4

Re: My memory and my computer's memory have failed *LINK*

Brian Hahn in SW Wisconsin

>That handle sounds like the one described in a link posted about a month ago on the AAW forums by "chips29".


http://mysite.verizon.net/respwkup/stuff/id11.html

Re: My memory and my computer's memory have failed :-)

#5

Thanks for the link, Bill

Clem Wixted, Jonesboro, AR

>However I could find that page, both on my computer and when I did a search. The handle I am looking for is a bit more complex, but probably not any better, than this one.

Clem

Re: My memory and my computer's memory have failed :-)

#6

That's it Brian!

Clem Wixted, Jonesboro, AR

>Thanks, just what I was looking for.

I now have it bookmarked.

Clem

A Wisconsin expatriot from Waukesha.