Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Precision you can feel — woodworking perfected with Lee Valley

First Christmas to be able to give a turning!

Posts

First Christmas to be able to give a turning!

#1

First Christmas to be able to give a turning!

Carol - now in NC Nebraska

>First was a bowl that I was so late on, I couldn't wrap it, nor did I get a picture. But it is delivered and the recipient is happy. I could be a whole lot happier with it as it turned out, but then only a turner will see the errors of my ways. The really good part was that I learned a ton on this one. Sorry no picture.

But the other is thanks to Jen for inspiration. I picked up a driver set at the grab bin at the hardware store for $4. I removed the plastic handle and this is what emerged.

Cherry with a brass flare nut for the ferrule. It was very possessively received. LOL. Others could hardly get a hands on look at it. I like it well enough that I will go back tomorrow and see if any are left in the grab bin. I'd like one for myself!


img

Re: First Christmas to be able to give a turning!

#2

Congratulations! You got it!

Ron McKinley

>Glad you got it finished in time. That's a different type of kit than I'm used to but has a lot more uses with the nutdriver capability. Merry Christmas.....Ron

Re: First Christmas to be able to give a turning!

#3

Great job, Carol!

Eddie Pacheco; San Jose, Ca.

>The handle looks perfect to me. I need to get some shop time to try these and a few other things out. I also have 2 pepper mills that I need to make housings for. Because of my FIL's Thanksgiving emergency I haven't had time to do any gift or "me" projects yet.

Take care.

Re: First Christmas to be able to give a turning!

#4

Re: Congratulations! You got it!

Carol - now in NC Nebraska

>Thanks, Ron. Your input was invaluable. I put the spur in the tailstock and the drill bit in the spindle end to get the hole. It was a nice smooth operation and very much in control.

I looked at the 4 in 1's, but liked the nut driver capability much more.

I am pleased with the result and there will be more in the future.

The slopes of the abyss are very slippery. LOL!

Re: First Christmas to be able to give a turning!

#5

Fine looking driver handle and

Gil Jones on Lake Seminole GA

>I like the nut driver idea too.

Gil

Re: First Christmas to be able to give a turning!

#6

Re: First Christmas to be able to give a turning!

Cyril Griesbach

>Very nice, Carol. Clearly, someone close to you has a wonderful and functional gift.

Re: First Christmas to be able to give a turning!

#7

Re: First Christmas to be able to give a turning!

George Van

>I can see why they were so happy Carol, nice touch with the brass ferrule. Around here I would have to turn a snowshovel handle!

Re: First Christmas to be able to give a turning!

#8

Carol, the 4 in 1 may actually be...

Clem Wixted

>... a 6 in 1 screwdriver.

The 5th and 6th items usually are 1/4 and 5/16 inch nut drivers. These are the sockets that the small and large driver bits fit into.

Clem

Re: First Christmas to be able to give a turning!

#9

Barb Siddiqui

And you didn't send it here?

Barb Siddiqui

>What? You and I have to trade beginner turnings one day, lady. Nice job!

Re: First Christmas to be able to give a turning!

#10

Re: Carol, the 4 in 1 may actually be...

Carol - now in NC Nebraska

>That's interesting. I didn't know that. Thanks.

Re: First Christmas to be able to give a turning!

#11

Re: And you didn't send it here?

Carol - now in NC Nebraska

>LOL!

I was so glad to get the thing done in time to give it on Christmas Day. I thought it turned out well - pardon the pun. I guess a handle is a spindle turning technically, so that was one of my first ones. I have some mini turning tools that need handles so that is high on the list at the moment.

So. Whadda ya wanna trade?

Re: First Christmas to be able to give a turning!

#12

Barb Siddiqui

Anything

Barb Siddiqui

>you make, as long as it's signed! I can't reciprocate until the weather gets warmer,

but I'll keep you in mind and we'll do it. Al-l-l-l-l my pathways are paved with the best of intentions, Pastor Carol. (Please note new e-mail address above.)