Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Combination Press Plough Plane

Maple box

Posts

Maple box

#1

Maple box

Danny Wells

>Made this one as a Christmas gift. It was inspired by one of Mike's boxes, but the base is taller...the result of a catch that had to be fixed. I think I got the top a lot better this time. It's 3" tall by 2 5/8 diameter. Critiques welcome.


img

Re: Maple box

#2

Re: Maple box

Danny Wells

>Second pic w/ another quadrant showing.


img

Re: Maple box

#3

Mike Stafford

Re: Maple box

Mike Stafford

>Danny, you did a wonderful job. I bet that wood was a challenge. I have turned some boxes with cracks like that and they always presented a challenge. Your design is very original. I like it a lot.

Re: Maple box

#4

Re: Maple box

Danny Wells

>Thanks very much Mike. It was a challenge, but not so much the cracks which are filled with powdered copper. I had a couple bad catches, and that is not usually the case for me. I guess the changing of the direction of grain in the swirls was most of the problem. The swirling grain (actually a feather crotch) made it really difficult to get a smooth finish on the inside, too.

The original goal was a shape similar to one of your shedua boxes, but had to make some "lemonade". I'm glad I had enough wood to pull it out.

Merry Christmas!!!

God Bless

Re: Maple box

#5

Re: Maple box

Allen Neighbors

>Danny Wells did well! Nice looking box.

I've found that if I'm turning wood with this sort of grain... that is conducive to catches, if I turn up the speed, and take just a little bit lighter cuts, it goes a lot better for me. Just a hint....

Did you put a diamond inset in the lid? :) Kidding, of course.

Re: Maple box

#6

Re: Maple box

Jennifer@Indy.USA

>Danny, this is a wonderful looking box. I love it a lot. Nice job for sure.

Jen

Re: Maple box

#7

Re: Maple box

Craig Daymon

>Very nice box Danny, the shape has a lot of character. I like the very strong curves. Nice figure in the wood as well.

-Craig

Re: Maple box

#8

Re: Maple box

Danny Wells

>Thanks ya'all, I appreciate the kind words. I'm glad to know that the final product is pleasing to other eyes besides mine.

I appreciate the input.

Danny

Re: Maple box

#9

Re: Maple box

Bob Edwards

>Nice recovery Danny. Glad to see you in a different form. You won't call many ducks with this but it is a beautiful piece!

Re: Maple box

#10

Re: Maple box

Danny Wells

>Thanks Bob, it's good to hear from you. There's only so much you can do with shapes when it comes to duck calls....needed to hone my skills on other shapes techniques. But I did make three especially for customers who gave them as Christmas gifts. Here is one made from Afzelia Lay and African Blackwood.


img

Re: Maple box

#11

Re: Another turkey call

Danny Wells

>And this trumpet yelper was done as Christmas gift. It's Texas Ebony and ivory with a brass ferrule. It is 9" tall. The photo does not do the wood justice. It was a beautiful piece of wood.


img