Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Rare Exotic & Domestic Hardwoods, Milled In-House in Oregon. Browse Unique Stock.

my first pepper mill

Posts

my first pepper mill

#1

my first pepper mill

JohnKJordan in East TN

>Never tried a pepper mill before, so I bought a couple of ceramic crushgrind mechanisms last week. This is my first attempt with a shaft mechanism, made for a present. Cocobolo.

JKJ


img

Re: my first pepper mill

#2

Re: my first pepper mill

Cyril Griesbach

>Much better than my first. I like the finish on this one.

Re: my first pepper mill

#3

Re: my first pepper mill

Bruce McElhaney, Spring Lake, Michigan

>Beautiful wood. Cocobolo? Beautiful finish. Interesting design. I especially like the upper half.

Re: my first pepper mill

#4

Re: my first pepper mill

bhenr99

>Great looking design and finish.I,m sure you will enjoy it.

Bob

Re: my first pepper mill

#5

Re: my first pepper mill

Allen Neighbors

>Who would want to twist on that beautiful piece? Beautiful design, and the finish is extraordinary! I love Cocobolo... I guess it's about my favorite wood to turn. It's just rich!

I think you'd better quit making pepper mills now... you can't top this!

Re: my first pepper mill

#6

Re: my first pepper mill

RonZ

>Great start John. Those ceramic grinders are not only fun and easy to use, they work great, too.

Re: my first pepper mill

#7

Re: my first pepper mill

JohnKJordan in East TN

>>I think you'd better quit making pepper mills now...

My wife absolutely loved it. (Cocoblo is one of her favorite woods, good thing I have a lifetime supply.) Now she wants one for salt to go with it, the same shape, but maybe from some contrasting wood. I'd want it to be about the same weight - I have some big chunks of dogwood that might work.

Dang, it's a lot easier to make a unique one of something than two identical!

JKJ

Re: my first pepper mill

#8

Re: my first pepper mill

Barry Turner

>I love cocobolo too. Too bad it doesn't like me. I get a red rash on my forearms every time I turn this stuff. It is beautiful, though!

Re: my first pepper mill

#9

Re: my first pepper mill

JohnKJordan in East TN

>>I get a red rash on my forearms every time I turn this stuff.

Me too. I find I'm OK as long as I wear long sleeves, rub lotion on the exposed skin of wrists and hands before turning (just don't let that get out to the other farmers down at the co-op), and use a respirator when sanding.

JKJ

Re: my first pepper mill

#10

Re: my first pepper mill

Ron McKinley

>How long and how big around? You know the old saying: The bigger the peppermill the more expensive the restaurant.

No matter the size you did a great job! ......Ron

Re: my first pepper mill

#11

Re: my first pepper mill

JohnKJordan in East TN

>>How long and how big around?

The diameter of the CrushGrind mechanism (about 1.5") somewhat dictates the minimum diameter of the bottom: I made it 1.8" at the narrowest and 2.2" at the widest. I tried to design the upper part and knob at the top to fit the hand: 1.5" where gripped and 2.1" for the knob. It does fit very comfortably in the hand. The entire thing is about 8.5" tall. I cut a few inches off the shaft to fit the wood.

>You know the old saying: The bigger

>the peppermill the more expensive the restaurant

My son said the biggest peppermill he ever saw was at a local ChickFilet fast food place - perhaps over 3' tall. That's crazy!

Maybe someone could turn one for the Guniness book of records that takes three people to operate: one to hold the body, one to turn the mechanism, and one to direct the end over the dish. For more fun, mount several grinding mechanisms in the the bottom and drive them all with a system of gears. Or easier, how about several grinding mechanisms in one huge mill with a separate knob for different types of pepper: "Black pepper, Miss, or Green, perhaps White?"

JKJ

Re: my first pepper mill

#12

Re: Question, John...

Allen Neighbors

>JK, how did you come up with a lifetime supply of Cocobolo? Right now I'm eating my heart out.... :)

Re: my first pepper mill

#13

Re: Question, John...

JohnKJordan in East TN

>>...lifetime supply...

Several unrelated events contributed, each a story in itself. If you live or drive through E.TN, drop in one day and I'll cut you off a couple of box blanks or something.

The irony is if I end up one day with increased sensitivity to the dust, which I understand is likely, I'll have to get rid of it all. I heard of a demonstrator who was so allergic he did not dare use a lathe that had been used earlier for cocobolo unless someone cleaned it carefully. Fortunately, I discovered cocobolo is fantastic for starting fires in the woodburning stove! :) My wife groans when I do this with scraps.

JKJ

Re: my first pepper mill

#14

Re: Holy Mackerel!! I just slapped...

Allen Neighbors

>myself in the head with both hands! I couldn't believe I read where you were starting fires with Cocobolo! I have some pieces that aren't much more than an inch long... I refuse to toss them in the burn box. To me, it's the prettiest wood ever grown.

I'm tempted to come to E. TN. just to take you up on that. Hmmmm... wonder how much diesel that will take.... about the same as the trip to Ellijay, I suppose... plus a little... 'bout a grand, round trip...

John, I hope you never become allergic to it.

I hope I never do, either. :)

Anytime you're up to a swap, let me know what I can get you from here.

Raining and/or snowing here in NW Texas.

Re: my first pepper mill

#15

Re: Holy Mackerel!! I just slapped...

Carol - now in NC Nebraska

>Gees, John, I'll send you $10 to ship a Priority Mail box full.

Re: my first pepper mill

#16

Don't worry!

JohnKJordan in East TN

>I just burn tiny thin scraps too small for turning.

I keep short pieces, flat strips from trimming blanks on the band saw, and even short end-grain pieces left over from making boxes and tops. In fact, just ask my wife, I keep way too much of everything! I'm very careful with the cocobolo, pink flame, bloodwood, ebony, mesquite, and other woods that don't grow around here, plus others that are hard to get like big pieces of dogwood. I'm saving some of the larger pieces until I feel my skills are at the point where I'll won't be so likely to waste them.

Be glad to share or trade a bit though if you ever find yourself this way - we love company! I've given/traded some pieces to local turners, and almost everyone likes a cocobolo pen blank or two.

If you look at cocobolo under the microscope, the pores appear to be filled with hard amber-colored resin. I wonder if the resin is quite flammable, as well as the oils in the wood. Light the end of a thin stick of cocobolo and it burns about as well as some wax impregnated fire-starting sticks I bought one time. Cutting into big blocks it's obvious that the outer areas are much darker than the inside, the wood is still a lovely dark color but the beautiful orange color is gone. I'm sure this is due to the natural tendency of all wood to darken with age, perhaps accelerated by oxidization. I haven't tried to analyze it but it seems the darker wood does not burn as well as the orange, perhaps due to the oil in the wood drying out. I wonder if I should wax coat the entire slabs and blocks if since I probably won't turn them for years.

JKJ