Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Veritas - Innovation in Tools

New toy

Posts

New toy

#1

New toy

john lucas

>I've spent the last several weeks working on several flat projects and some commission jobs but in between I had time to build this. It's a Router powered threading machine with the Bestwoodtools Baxter theader. I can't wait use it. It will probably be after Christmas before I have a chance to play with it. I plan to put a speed control on it and also a lexan protective shield. I don't relish sticking my hand into a 1/2" cutter spinning at 20,000 rpm.


img

Re: New toy

#2

Re: Hey John- I have more Lexan golf.....

Jamie Donaldson

>....cart windscreens if you need to make any scatter shields!

Re: New toy

#3

Re: New toy

Dick Coers

>Just like unwrapping presents early. Looks really nice. I had a Klein lathe years ago with the thread attachment. It worked really well. You'll have a lot more capacity with your machine. I found that you really don't want or need many threads. It can be a fuss to take a lid off a box by turning and turning it. It will test your eye getting ready for the threads though. Nice straight walls for good threads. How many threads per inch? If you sell the work you may need a little card on the box telling the customers that it is a threaded lid, seems they don't even think about unthreading a lid. I've also had some customers that didn't think a light press lid was a box at all. You had to tell them it had a lid. What did they think that little turning was for? HAVE FUN!!!

Re: New toy

#4

great idea!

JohnKJordan in East TN

>What a fantastic idea! I have the Baxter threader for my larger lathe and was thinking of purchasing the parts to adapt it to my mini lathe. A gizmo like this solves all sorts of problems!

If you decide make these for sale (especially the base), I want one. If not, is that welded up from angle iron? Could you spare a few more photos?

JKJ

Re: New toy

#5

Hey, are those Oreos in the background?

Eddie Pacheco; San Jose, Ca.

>Nice work on the threading machine. Perhaps, because of the light cutting loads, you might be able to get away with just a simple lamp dimmer speed control?

Re: New toy

#6

Re: Hey, are those Oreos in the background?

don lewonczyk

>Way to cool John, you do exellent work and you have a neat clean shop. I would be embarassed to take you in mine. I have a 30x40 shop and its still a one butt shop. Harbor Freight has the speed control on sale fairly often and the last time I think it was 9.95, usually the sale price is 12.95 and regular price is 24.95. Did the thread cutter come with the baxter machine? Would it be like the one ENCO sells. Would you know if the carbide tip one Enco has for 58.00 with a pitch range I think fron.051 to .062 work for threading boxes? Sometimes I don't know what the H--l im taking about and confuse more people then I do myself. Anyway you are one talented person and Merry Christmas to you and your new toy. Don L

Re: New toy

#7

Re: great idea!

Barry Irby

>T'other day someone posted that Woodcraft is selling the older version of the Nova bed extensions for about $90. They would make a great base for something like this even if you don't won a Nova lathe. You could just use it by itself.

Re: New toy

#8

Re: great idea!

john lucas

>John It was welded up from angle iron. I won't do that again unless I use thicker metal. The metal warped slightly and required a lot of filing to clean up the gap between the sides. It also flexed slightly so I put wooded spacers inside to stop that. I also epoxied a 1/4" spacer bar underneath the top so the Baxter threader would lock down properly.

If I was doing it over I would use thicker angle iron for the bottom and sides and then 2 thick flat rectangular bars for the top.

Re: New toy

#9

Re: great idea!

john lucas

>Barry Exactly what I thought. In fact after I got it done I thought I would look on ebay for extensions. I had this threader fitted to my Nova Comet which uses those bed extensions. I'll bet you can get one for $40 or $50 bucks if you look. Vic knows the dimensions of the bed extensions so it's no problem to make an adaptor base.

Re: New toy

#10

Re: Hey, are those Oreos in the background?

john lucas

>Don that photo was taken in my kitchen (that's where the oreo's live a short life). I haven't looked at the Enco cutters. MSC has some cutters that will work but they are just as expensive as the Ones that Bestwoodtools sells. I would simply buy from Vic because you know they will work.

I did have to build a 3/8 to 1/2" adaptor to fit the router. All the cutters I can find so far come in 3/8". Thee are some very small cutters that www.RioGrande.com sells that come with 1/8" and 3/32. Those would fit the Dremel and flex shaft machines if you wanted to try one of those. I'm not sure exactly what angle they are but it shouldn't make any difference because you are making the male and female thread with the same cutter. I'm going to build an adaptor to take the Dremel and give them a try. That would make a really great traveling machine.

Re: New toy

#11

Re: Hey, are those Oreos in the background?

john lucas

>Eddie Oreo's and doughnuts are my weakness. That's why I have to spend so much time on the bicycle. I could probably stop riding entirely if I would just stop eating those things.

You can buy router speed controls from HF cheaper than lamp dimmers. I'm going to buy 2 next time I go. One for my single speed dremel and one for this router. I already have one on the router table and they work great.

Re: New toy

#12

Re: Hey, are those Oreos in the background?

Jorge Castaneda~Downeast Maine

>Hi John

Good idea, and thanks for sharing it.

I have a Hitachi router and it comes with a 3/8" collet besides the usual 1/4" and 1/2". I use that router in my routing table and have a $30.00 speed control gizmo that I bought from Woodworker's Supplies yeas ago, look around, I bet they are still out there.

Jorge

now where I put the Delta Midi extension?...

Re: New toy

#13

Re: great idea!

Stuart Johnson

>Couldn't you fix the router base to work on your lathe bed up by the headstock? It looks like just about any lathe other than a dedicated bowl lathe would handle it okay.

Re: New toy

#14

Re: great idea!

john lucas

>I don't see why not. My mini lathe is too short to do this but any lathe with a long bed would handle it.