Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Personalized Wooden Watches, Engraved Free

New Tool

Posts

New Tool

#1

New Tool

Lester Gillett/Independence Mo

>I received a new turning tool from my secert santa this year. I am

the owner of a Crown Beecham Skewchigouge. Has any one used this

tool and how does it work ? I do pens and segmented work,so will

this tool be good for this type of turning?

Lester

Re: New Tool

#2

Re: New Tool

Ron McKinley

>I have the Sorby Spindlemaster which I believe is very similar and it works very well for detail work....Ron

Re: New Tool

#3

Re: New Tool

Darrell Feltmate

>Lester

I made one of those a while ago. It is a great addition to the arsenal for detail spindle work. Ride the bevel like a skew and use it also like a gouge. I like it especially for coves in small spindles.

Re: New Tool

#4

Re: Bedan=Skewchigouge?

Allen Neighbors

>Darrell, is that the same as what is called a Bedan?

Re: New Tool

#5

No

Jorge Castaneda~Downeast Maine

>Allen the bedan is a trapeze or square shank tool with one bevel, not two like the skew.

Re: New Tool

#6

Re: Bedan

Ron McKinley

>I have one like you describe but I've seen others in pictures that have two bevels like a skew but it's not skewed. I believe these were used by English and Aussie turners......Ron

Re: New Tool

#7

Re: Bedan=Skewchigouge? *LINK*

Darrell Feltmate

>Allen

A bedan starts as a square and a skewchigouge as a round. The bedan may have sides let in a bit to form a trapezoid when looking face on. This gives clearance to the top when cutting straight in. It is sharpened to a 45* or 60* angle with the leading edge square to the sides as opposed to a skew that would have a leading edge at 70* to the sides and a bevel on both sides.

A skewchigouge has the top ground away for about an inch so as to leave the cutting edge about center when looking face on. It is then ground to a profile similar to a spindle gouge and a bevel of about 60*.

My apologies for having neither on my web site. I will rectify the matter after Christmas but likely not before New Years.

The site is still awkward to get around although a lot better than last year. It has simply grown far larger than I expected, but folks seem to like it. The addition of the video has helped but I need to rewrite both for the folks who read it and for me to find my web designer's way around in the background. Anyway, I will get the pages up soon.

Merry Christmas to all.


Around the Woods

Re: New Tool

#8

Re: Bedan=Skewchigouge? *LINK*

Stuart Johnson

>There are a few youtube videos about using the Bedan. The one below is pretty good.


Bedan Class Demo in Japan

Re: New Tool

#9

Re: Thanks, Stuart :)

Allen Neighbors

>