Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Personalized Wooden Watches, Engraved Free

Appropriate woods for pen blanks....

Posts

Appropriate woods for pen blanks....

#1

JL

Appropriate woods for pen blanks....

JL

>I am a compulsive pack rat - I admit it. I collect tools, wood, books, etc. So, I have lots of bits of scrap lumber. The LOML has suggested that I clean some of it out :(. The oak, maple and poplar can go to my local friends with wood stoves (several boxes worth).

So are the following woods appropriate for pen blanks:

Mahogany?

Brazilian Cherry?

Black Walnut?

Cherry?

Re: Appropriate woods for pen blanks....

#2

Re: Appropriate woods for pen blanks....

RevDoug

>All of those are appropriate as are the others that you are offering as firewood. For pens there are basically no bad woods, just some are better/easier than others. The pieces are so small that even the hardest of woods can be turned down in just a couple of minutes. Really soft/punky wood could cause some issues with taring away from the tubes, but even that can be over come with proper use of CA to stabilize it. With all that said, I need to go to the shop to turn a couple of pens and a letter opener.

Turn 'em round,

Re: Appropriate woods for pen blanks....

#3

Re: Appropriate woods for pen blanks....

Ray Binnicker

>They certainly do make nice pens. By themselves some folk think they may be a little bland. You can spend a little extra time, cut your pieces in strips, glue them together, alternating species, i.e., maple/walnut/cherry/, etc. When they are dry cut out your pen blanks at an angle. Your friends will be impressed.

Ray Binnicker

Re: Appropriate woods for pen blanks....

#4

Re: Appropriate woods for pen blanks....

JohnKJordan in East TN

>JL,

My favorite pen woods are dense (the harder the better), fine grain, and with tight contrasting figure (the wilder the better). I once bought a box of pen blanks cut from a bunch of different types of wood and discovered quickly that bland figure usually makes a bland pen. (IMHO)

If I have good contrasting straight grain/figure and a big enough piece of wood, I also like to cut blanks somewhat diagonally which makes far more interesting patterns on the pen (IMHO). I've made a number like this from cocobolo that were quite popular.

Don't forget that small pieces of even bland wood can make great finials for boxes and Christmas ornaments. I think unfigured wood works better with these since the complex shape of the finial provides the interest. Great for little finger tops too! (Hey, I'm still using the box of dowels you gave me to make little tops - the other day I took a handful to a social worker who often works with kids.)

JKJ