Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Urban Salvaged Hardwood Slabs, Milled In-House from Rare Trees. Shop Unique Walnut Stock.

Lens Cap

Posts

Lens Cap

#1

Lens Cap

Joe in a Cleveland suburb

>Hello.

I lost one of my lens caps to one of my camera lenses. It would be easy to go buy one. I suppose cheap too.

I got to wondering though if it would be difficult to make something with my lathe and some scrap cherry, walnut, or something similar.

It's basically just a disc about 3.5" dia. Not sure how it would attach though. It would either need to fit over the outside of the lens or there would need to be some kind of spring loaded type thing holding on to the inside of the lens filter.

Just a silly idea but has anybody ever done this?

Thanks,

Joe

Re: Lens Cap

#2

Re: Lens Cap

John Kyler

>I will say many of my old caps had a felt/velcro on the inside of the cap that created a pressure fit that kept them on most of the time.

Back when I used caps.

I now just throw on a UV filter and replace when or if I need to due to scratches.

John

Re: Lens Cap

#3

Peter Charles Fagg (UK)

Re: Lens Cap

Peter Charles Fagg (UK)

>My cameras have never had caps, I use Skylight 1A filters that have virtually no effect on the images and when they get scratched I replace them.

As to making wooden caps, I suppose it is a possibility but might I suggest that they be made a loose fit with some form of rubber ring (Possibly "O" ring) inside to take up the expansion/contraction of the wood?

Regards, Peter.

Re: Lens Cap

#4

Re:In my working days as a.......

Jamie Donaldson

>.....photographer I seldom used a lens without a hood, and found caps to fit most of those hoods. With the new cut-away segment zoom lens hoods that is not an option, so I would recommend that you just buy another cap. Making a cap from wood is a waste of productive turning time, and if it warped and cracked your front element you would not be a happy photographer!

Re: Lens Cap

#5

Re:In my working days as a.......

Bruce McElhaney, Spring Lake, Michigan

>While it's possible to make a lens cap out of anything, including a cast off Pringle potato chip can top, I'd have to agree with Jamie and others. I generally use a a UV filter and lens hood instead of a lens cap, and would rather use my turning time for more rewarding projects.

Re: Lens Cap

#6

Re: Lens Cap

john lucas

>Joe I'm a lens cap nut. Back before digital cameras screwed everything up I kept lens hoods on all my lenses and covered them with Tupperware goblet caps. As Jamie said you can't do that with todays lenses because the lens hood is a strange shape.

I like the lens caps that you reach in and squeeze the middle which pulls two spring loaded piece in releasing the cap from the filter threads. This should be easy to make. I don't have a good lens cap of that sort to show you right now. We have some of that style at work.

It's basically a round disc with a dado cut through it. 2 flat pieces with outside curves to match the outer shape of the disc (or your filter ring)are placed in this dado and pushed apart by a spring. Then a disc or flat plate fits over this to keep everything in place. You would have to cut a slot in the top for some squeeze levers. While routing the dado you could just route this slot.