Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Fast and affordable laser cutting – so you can make the parts you can’t find anywhere else

Christmas Screw Drivers

Posts

Christmas Screw Drivers

#1

Christmas Screw Drivers

Jennifer@Indy.USA

>Hey Everybody,

Hope everyone is staying warm and dry. I've been making some crafty things for gifts for various people over the past few weeks and thought I'd share. I've never made these kit screw drivers before (Rockler Woodworking and Hardware) but they are really fun, easy and addicting. I'm going to hand these out to the guys at work. They are always poking fun at the stuff I make by always asking..."uh, what do you do with it"? For that reason I've never made any of them anything other than a pen here or there. So this year all the boys I work with are getting these useful "Objects d' Art", Ha! If you haven't tried making these and are looking for a quick easy project I would recommend them!

Jen


img

Re: Christmas Screw Drivers

#2

Re: Christmas Screw Drivers

jared

>I have made a few screw drivers before but used a plastic handles driver from Menards and then cut the plastic off. Did you use a regular magnetic bit holder to make these? Thanks jared

Re: Christmas Screw Drivers

#3

PS : .......

Jennifer@Indy.USA

>FYI-I didn't show them but they come with 4 interchangeable tips. Straight, Phillips, and two sizes of square.

Re: Christmas Screw Drivers

#4

Everything comes in the Kit From Rockler  *LINK*

Jennifer@Indy.USA

>


Screw Driver Kit

Re: Christmas Screw Drivers

#5

Re: Christmas Screw Drivers

Bill Clark

>Very impressive and practical. I like all of the different handle styles. I may have to try making some of these myself.

Re: Christmas Screw Drivers

#6

Re: Christmas Screw Drivers

keith zimmerman, Normal, IL

>Way to go girl! I get the same kinds of questions here when I show hollow forms to people. Everybody seems to think everything has to have a purpose other than to be beautiful.

Your co-workers will now realize that there is practicality to be found in your turning addiction. They are a very lucky bunch.

BTW, The handles on these screwdrivers are gorgeous. I'm going to Rockler Saturday. I'll have to check out these kits.

keithz

Re: Christmas Screw Drivers

#7

Re: Christmas Screw Drivers

tek-Brunswick, Ohio

>So which handle feels the best? Try them all and make one for yourself patterned after the most comfortable fit. They sure look nice! What are you using for finish on them? Something durable?

Re: Christmas Screw Drivers

#8

Re: Christmas Screw Drivers

Jennifer@Indy.USA

>Thanks Tek,

I just put a wipe of Danish Oil on them let the set for a few days and then went through the Beal wheels. So no, it's not a real durable finish. I'm hoping they get used and patina to nice worn look.

Jen

Re: Christmas Screw Drivers

#9

Re: Christmas Screw Drivers

Sean Troy

>Beautiful !

Re: Christmas Screw Drivers

#10

Re: Christmas Screw Drivers

Curtis TX

>Those look great. I am sure the guys will very impressed!

Re: Christmas Screw Drivers

#11

Re: Christmas Screw Drivers

Carole Valentine

>Cool Jen! Wish I had known about them in time to make some for Christmas. Too late now. :(

Re: Christmas Screw Drivers

#12

Re: Christmas Screw Drivers

kenny in indep MO

>Those are really nice, much better than the ones I made last year. Helpful note, watch Harbour freight, got some on sale for less than 2.00 each last summer.

Re: Christmas Screw Drivers

#13

Re: Christmas Screw Drivers

kenny in indep MO

>Forgot to add, I cut the handles off the ones I ordered, took no time at all.

Re: Christmas Screw Drivers

#14

Did the HF screwdrivers...

Clem Wixted

>...have the hex receptor (looks like a nut) for the screwdriver blades or the tapered and grooved receptor?

I bought some at a "warehouse tools" type place and they didn't have the hex receptor. The receptors are tapered, with grooves, and have a flange on the outside end face. I think the hex one would be better and stronger when driven into the end of the handle, under a ferrule.

Clem

Re: Christmas Screw Drivers

#15

Re: Christmas Screw Drivers

Bill Hale / The Wood Spinner

>Jennifer

Thanks for the heads up on these. Yours look great and I have not seen them in the catalogues. I just ordered 10. Christmas may be past but there are other reasons to make them.

Thanks Bill

Re: Christmas Screw Drivers

#16

Re: Christmas Screw Drivers

Tom Vensel

>Hi, I made 11 of the screwdrivers to give for Christmas .I first seen them as a woodturning project in Wood magazine . The kit price,from Rockler is $6.95 plus 1.50 tax plus 8.00 shipping ! I happened to have one of the plastic handled ones in a junk drawer in the kitchen so I bandsawed the handle in two,and drove the receptor out .The receptor is just a press fit in these screwdrivers .I then followed the Wood mag directions to finish the rest of the project and it turned out great . Two days later I seen in a Harbor Frieght add where they were on sale for $1.oo each with a limit of 10 screwdrivers ! These should make nice gifts and save a bundle too.Merry Christmas everyone . Tom ,from SE Ohio .

Re: Christmas Screw Drivers

#17

Re: Did the HF screwdrivers...

kenny in indep MO

>Yes, the HF screw drivers were like that and may still be. I turned the hole to match the insert and added some CA glue. Worked fine, I have two around the shop that have been used a lot and still holding strong. I did make a furrel(sp) from copper pipe which I also CA glued to the wood The ones I gave as Christmas gifts in the office last year have reported no problems.

Re: Christmas Screw Drivers

#18

Mike Stafford

Should be some happy co-workers!

Mike Stafford

>I like the idea of passing them out as gifts. They will be most appreciated. A few years ago I did something similar with turned awls. I packaged them up in short mailing tubes and wrapped them. Then I let each person just reach into the bag and choose one. It was a fun thing to do.

These are great looking screwdrivers, Jen, but no one will want to use them. Too pretty!

Merry Christmas!!!

Re: Christmas Screw Drivers

#19

Thanks, Kenny

Clem Wixted

>

Re: Christmas Screw Drivers

#20

I gave in...

Ron McKinley

>Yours looked so good I ordered 10 kits from Rockler. I had resisted making any of these because you can buy a great Crescent screwdriver set with a very comfortable handle at Wal-Mart for about $4. But, the beauty of a wood handle won out! Thanks for posting yours .......Ron

Re: Christmas Screw Drivers

#21

Re: I gave in...

wayne kuhn

>I made about 18 of these last year for gifts. My original thought was to give them to guys, then i realized the last thing the guys I know need is another screwdriver. I then decided to give them to all the women in my life and named them "The Amazing Kitchen Screwdriver"

I also put together a goofy tongue in cheek instruction booklet, put them in a plastic tube and wrapped them. They were a great hit and I am still getting compliments on handy they are. Great gift idea.

Re: Christmas Screw Drivers

#22

Great Idea, Wayne

Clem Wixted

>I have a few of these screwdrivers that I also made up for the women in my family. Great minds think alike :-)

I hadn't thought of an instruction booklet but that is a great idea.

Would you mind sharing your instructions?

Thanks,

Clem