Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

This is the most versatile work station you will ever use

I see Snow people

Posts

I see Snow people

#1

I see Snow people

tek-Brunswick, Ohio

>I ground a 3/8 round skew from a blank I bought from Doug Thomson and put a handle on it. I had to try it out so I made these snow people. They are pins to wear for the holidays. The figures and their hats are turned separately. After the hats are glued on, the backs were flattened on a disk sander. I glued on pin backs from the craft store. I made the bottoms flat so they will stand up when not being worn. One of them was already gone before I took this picture. I am very happy with the new skew. Doug is a great gut to do business with.


img

Re: I see Snow people

#2

oops

tek-Brunswick, Ohio

>That was supposed to read a great guy to do business with.

Re: I see Snow people

#3

The Snow People are ...

Ed Moore

>Spectacular and Special! Super job!

And Doug Thompson IS a good GUY to deal with.

I use a 1/4" round skew quite a bit. I have a 3/8" and for some reason I don't use it.

Ed

Re: I see Snow people

#4

Re: I see Snow people

Brian Hahn in SW Wisconsin

>Nice collection.

Maybe I'll try those for next year's Christmas ornament gifts.

Re: I see Snow people

#5

Steven Antonucci

I made one last year...

steve antonucci

>Loads of fun, and I'll bet that they're all accounted for?

Nicely done.

Steve

Re: I see Snow people

#6

Re: I see Snow people

Gordon Seto

>Tom,

Very nice, cute.

I am going to steal it; not the tool, just the design idea.

Gordon

Re: I see Snow people

#7

Skew

tek-Brunswick, Ohio

>I don't have a 1/4" Skew yet. I was wondering if Doug has some 1/4" round stock. I could see where it could get into some tight places.

Re: I see Snow people

#8

Merry Turning

tek-Brunswick, Ohio

>Anybody who wants to make them turn away. I don't claim them as a terribly original idea. I try to find something small to make multiple copies of for Christmas each year. Last year I made Nick Cook style Icicle Snowman ornaments.

Re: I see Snow people

#9

Re: Skew

john lucas

>Bob Rosand sells a 1/4" HSS skew and it's great. I have one. for the kind of work I do with that skew the edge holding capabilities are fine.

Re: I see Snow people

#10

Two-faced tape

Charlie Anderson

>If you make a turning block of two pieces of wood with two-faced tape connecting them, you can turn a snow man, separate the 2 halves and you have two snowman pins. It halves your turning time.