Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Identify and use hundreds of woods

Thinking of getting a lathe *LINK*

Posts

Thinking of getting a lathe *LINK*

#1

Thinking of getting a lathe *LINK*

Mark in B'ham

>What do y'all think about the Penn State variable speed?


Amazon link to PSI lathe

Re: Thinking of getting a lathe *LINK*

#2

Steven Antonucci

What would you do with a lathe? :-)

steve antonucci

>No, seriously...

If you're thinking about getting one, it's probably with some purpose in mind. Tell us what you see yourself doing, and we'll make a call.

Steven

Re: Thinking of getting a lathe *LINK*

#3

Re: Thinking of getting a lathe

john lucas

>It looks like a copy of the Jet mini VS. I don't know how good Penn State Industries is about covering problems. We know Jet has been very good. I would look at the Jet mini and see if you can find a sale on it. We know it's a good lathe.

Re: Thinking of getting a lathe *LINK*

#4

Re: Thinking of getting a lathe

Steven Kubien

>As Steve A. said, it depends on what you want to do (project-wise). What's the plan?

Steve Kubien

Re: Thinking of getting a lathe *LINK*

#5

JL

Re: Thinking of getting a lathe

JL

>I'd prefer a Jet VS mini lathe - proven track record and lots of things are available for it. Not to mention that it has a good resale value if you decide to trade up eventually.

Seriously though, the Turncrafter Pro looks to be a knock-off of the Jet at a lower price.

Re: Thinking of getting a lathe *LINK*

#6

I posted and ran last night, ...

Mark inb'ham

>Sorry, I had to get to an office Christmas party (no, wait, that means I was thinking about woodworking at work - nah :) . Anyway, this would be a first lathe, so the firth think I'll be doing is practicing and learning how to use the tools. I am hoping to do some bowl and plate work eventually. I'm hoping for some artistic muse to hit me. The only thing that I absolutely must do someday is turn both of my boys a baseball bat. They are 2 and 4 so I have some time.

In regards to my thinking about the lathe, I have to watch my money so I am looking for the price/performance tradeoff. As you probably gathered, I am a hobby woodworker. My shop space is not that limited right now.

Thanks for the input, y'all

Re: Thinking of getting a lathe *LINK*

#7

"firth think" is "first thing" - typing lisp

Mark inb'ham

>

Re: Thinking of getting a lathe *LINK*

#8

Did you give thought to a used lathe?

Ron in Drums PA

>

Re: Thinking of getting a lathe *LINK*

#9

Steven Antonucci

I'd second Ron's idea...

steve antonucci

>Some people buy a lathe as a "test" to see if they like it.

Some people buy a lathe to make small things to sell (and pay for the hobby).

Some people buy a lathe to make bigger things to sell (and pay for the hobby.)

Some people buy a lathe, then upgrade, then upgrade, then upgrade...

I'm on my third lathe, with the first two being sold for close to what I paid for them. There is a second hand lathe market that might get you more lathe than you can buy new... and it's what I'd recommend you look at first.

Steven

Re: Thinking of getting a lathe *LINK*

#10

Re: Thinking of getting a lathe

RevDoug

>Don't get the PSI. You'll fight it to do anything more than a pen. If that is all you're going to do with it then it might be ok, but I'd still question it. You'll be much better off with the Jet which is able to have extensions added to it, making the bed longer. You'll still be limited in swing, but at least you'll be able to turn those bats if you haven't already upgraded by then.

Turn 'em round,

Re: Thinking of getting a lathe *LINK*

#11

Re: I posted and ran last night, ...

don central illinois

>I really got to dislike office Christmas parties. The apologies the next day, the looking for a new job, etc. etc. Depending on your space you might look at a larger used lathe. I picked up an older Delta variable speed with a 16" swing for around $300. Had to drive about 5 hours, but SWMBO and I made a weekend of it.

Re: Thinking of getting a lathe *LINK*

#12

Re: Thinking of getting a lathe *LINK*

Brian Simmons, Heflin, AL

>Have you been to an Alabama Woodturners Association meeting yet? I am guessing that B'ham is Birmingham, AL. Check out our website. We meet on the second saturday of each month in Homewood. People interested in turning need not be intimidated, in fact out of all of our members chances are someone either has a used lathe for sale or will let you come to their shop and learn a little before you purchase. I understand buying on a budget but choose wisely because after you are bitten by the turning bug you will spend the money twice.


http://alabamawoodturners.com/

Re: Thinking of getting a lathe *LINK*

#13

Re: Thinking of getting a lathe

Bill Hale / The Wood Spinner

>Mark

No matter what you buy quality. A poor quality lathe is harder to turn on and is much less satisfying.

If after you start turning you decide you don't want to continue you can sell a quality lathe for almost what you paid for it. This is not likely to happen ! Odds are you will upgrade to a larger and better lathe.

I started with a 1930 Atlas that I paid $ 50.00 bucks for. I now have three high quality lathes and the old Atlas.

Before you buy go visit some turners, a club and get some input first hand info. You may find a good used lathe available from the club members. Buy a quality used lathe.

Welcome to a most addictive hoby.

Good turning and be safe

Bill in CG,AZ.

Re: Thinking of getting a lathe *LINK*

#14

Thanks for the invite Brian. I might see ya there

Mark in B'ham

>