Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

REAL MILK PAINT

Vicmarc VL100 mini lathe

Posts

Vicmarc VL100 mini lathe

#1

Vicmarc VL100 mini lathe

Charles B. Watson

>It was my understanding that this lathe had tapered roller bearings as does the VL300. However, when changing the belt it was discovered that the lathe I have has ball bearings. Has anyone had any experience with this issue?

Re: Vicmarc VL100 mini lathe

#2

Re: Vicmarc VL100 mini lathe

Allen Neighbors

>Charles, I have a VL100, but I've never had occasion to replace the belt on it. What's the difference in the tapered, and ball, bearings... just for my own info?

I don't even remember reading what mine has, anywhere.

Re: Vicmarc VL100 mini lathe

#3

Re: Vicmarc VL100 mini lathe

Charles B. Watson

>Tapered roller bearings can withstand large axial and radial forces, and are suppose to be better than ball bearings for applications that have these forces. They can also be maintained by the addition of grease as needed.

Re: Vicmarc VL100 mini lathe

#4

Mine has the tapered roller bearings

Phil in NJ

>I bought it from craft supplies within the past 2 years as a VL100 bare lathe.