Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Have a question? Ask Woody!

Multi-Center faceplate

Posts

Multi-Center faceplate

#1

Multi-Center faceplate

Craig Daymon

>I used this faceplate to create the box lid in the previous post. I'm thinking of some improvements that will let me more easily set position more precisely and if I succeed, I'll post more pics. I used a ruler to measure the offset when doing the box. It would also benefit from a built-in indexing control.

All holes are 1/4". The T-track is 3/4" x 3/8" from Lee Valley, along with the 1/4" T-bolts. The 1/4" matches well with #10 screws. Counter weights can easily be mounted using the extra holes.

Anyway, here are the pics.

-Craig

P.S. I tried to clean the carpet in the paint program. Over the holidays, I'll try to do it to the real carpeting.


img

Re: Multi-Center faceplate

#2

Re: Multi-Center faceplate 

Craig Daymon

>


img

Re: Multi-Center faceplate

#3

Re: Multi-Center faceplate 

Craig Daymon

>


img

Re: Multi-Center faceplate

#4

Re: Multi-Center faceplate

john lucas

>Craig Nice job on the lid. Thanks for the excellent photos of how you did it. John

Re: Multi-Center faceplate

#5

Re: Multi-Center faceplate

Norm Smith

>Craig, Very nice. A lot of thought went into this project which is obviously paying off. Thi box is excellent.

Norm