Thanks (and another view of the stitching)
steve antonucci
>Thanks for the compliments on the hollowform and the carvings.
Firstly, a word on carving. I cannot draw. Not a lick. I cannot copy a pattern either. But I can carve with OK results. If I can, ANYONE can.
I agree with John that you need a cut proof glove for your hand, and I've asked my wife to make a carvers lap apron (Lee Valley catalog). That's your safety gear. Beyond that, you can carve with anything sharp. Most of the work you see in these two Santa's was done with something I suspect everyone owns- a 1" chisel! Why, you ask? Because it was the sharpest thing I owned when I started...
Back to turning- here's a shot of the stitching. The cracks came during the rough drying stage. I turned it to this general form, and the wood felt (cheek test) pretty dry, but obviously wasn't. Rather than pitch it, I decide to finish turn it and set aside until inspired. I've always enjoyed looking at the old dough bowls and calabashes to see the original solutions to fixing something that was only marginally "broken". So I decided to use the wire to stitch this back together. A cutoff wheel in a Dremel created the spot for the stitch, and I pressed a small segment of wire in and CA glued it. Hand-filed it flush to complete the effect.
George- the other form is the olive one from yesterday (just below).
Steven
