Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Rare Exotic & Domestic Hardwoods, Milled In-House in Oregon. Browse Unique Stock.

converted Jet mini to rose engine------WebKitFormB

Posts

converted Jet mini to rose engine------WebKitFormB

#1

converted Jet mini to rose engine------WebKitFormB

Dick Coers------WebKitFormBoundaryqFOmq51H3saAc+aC

>I'm going to try and load my first photo here, please be patient. After seeing the MDF rose engine in the AAW, I thought about making my own using the backup Jet mini I have. Here are the first items off the machine. I won't give alot of details about the machine yet, I will be looking at selling a kit and instructions for people to make their own if this continues to work out. Please don't kill me about the design of the boxes, I just had to get something to the rose engine to verify the design of the machine. So far, so good. The spalted soft maple was too soft in the end grain and I had some chip out. The walnut was way better. The last photo on the right is the bottom of a spinning top. You'll have to take my word that there are 3 patterns cut in the padauk. Bad lighting!! I did not sand the grooving cuts, that's straight off the machine. Here goes with the photo, looks okay on the preview.

------WebKitFormBoundaryRXlUu868j+iS3aWc


img

Re: converted Jet mini to rose engine------WebKitFormB

#2

Re: converted Jet mini to rose engine------WebKitF

Dick Coers------WebKitFormBoundaryqFOmq51H3saAc+aC

>What's all that webkit stuff around my name and post?

Re: converted Jet mini to rose engine------WebKitFormB

#3

Re: converted Jet mini to rose engine------WebKitF

Ken Grunke from SW WI

>Are you using Safari web browser? I think if you upgrade to a newer version, that will be gone.

The pieces look great! I like the fluting on the top of the walnut piece.

Re: converted Jet mini to rose engine------WebKitFormB

#4

Re: converted Jet mini to rose engine------WebKitF

john lucas

>Dick I will definitely be interested. I have a spare jet mini right now. It looks like the cuts are clean. Let us know when things get ready. you've got our attention.

Re: converted Jet mini to rose engine------WebKitFormB

#5

Re: converted Jet mini to rose engine------WebKitF

Paul Waddle

>Hey,very much interested in the jet mini conversion. Also would like to know how you make the horizontal and veritcal cutting frames-what type of driver(mini router-drill etc),what type of table layout.... Did you convert the ball headstock bearings to bushings,do you get the pivoting,and plunging motion as well as rotation?? This definitely an art form I'm trying to learn.Thks,pw

Re: converted Jet mini to rose engine------WebKitFormB

#6

Way cool and the

Terry Quiram, Roanoke Illinois

>best part is that I get to play with it next Friday. Dick looking forward to seeing you on the 28th.

Terry