Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Portable Sawmill & Tree Service – Abingdon, VA

Cremation Urn -- Help Needed ASAP

Posts

Cremation Urn -- Help Needed ASAP

#1

Brad Vietje

Cremation Urn -- Help Needed ASAP

Brad Vietje

>Hi Folks,

I recently found out that a good friend's son was killed in a hit-and-run accident while walking in Oregon, and I've been asked to turn an urn for the memorial service.

I'm honored to do this, but need to move fast. Fortunately, I have a few rough-turned pieces that were destined to become lamp bases or med-lg hollow forms (~8" - 12" tall), and they've been sitting around after being hollowed out to about 5/8" - 3/4" for 1 - 3 years, so they're good and dry.

I would like to see photos of some good-looking designs, especially lid and finial ideas. I want something to look classy and formal enough, but not very showy. This is a very laid back, off-the-grid family, so high gloss and high fashion might look great, but wouldn't be appropriate in this case. I found a few good pix in the archives, as well as some really awful looking examples made from all sorts of materials by searching Google images. It amazes me what sort of gaudy and tasteless stuff we will buy when distraught and weakened by horrible misfortune!

Based on what I have on hand, I'll probably go with a form about 9" - 10" tall and around 6"-7" in diameter. I have some good candidates in Sugar Maple, White Ash and American Elm, and I'm leaning toward the Elm for somber good looks. I may have a good hollowed blank in Black Cherry, too. The cremains are being divided up between the parents (long divorced), and some of the ashes will be spread, so it does not have to be full-sized. After some mourning period, I'm assuming the urn will be buried.

Any help you folks can offer will be greatly appreciated.

Thank you kindly,

Brad Vietje

Newbury, VT

Re: Cremation Urn -- Help Needed ASAP

#2

Re: Cremation Urn -- Help Needed ASAP

Jennifer@Indy.USA

>Brad, first of all I'm really sorry to hear about your friend's son. That is just horrible. Two people who make urns that I would try to emulate if I were in need of making one are Mike Mahoney or Mathew Hill. Two entirely different styles, but both do incredible work.

A Google search will get you to their sites.

Jen

Re: Cremation Urn -- Help Needed ASAP

#3

Re: Cremation Urn -- Help Needed ASAP *LINK*

Brian

>Bill Dean of Marietta, GA turns cremation urns. he is a member of the Georgia Association of Woodturners. He has a gallery and other info on his web site at http://www.deansurns.com/.


Deans Urns

Re: Cremation Urn -- Help Needed ASAP

#4

Re: Cremation Urn -- Help Needed ASAP

Mac

>Brad...Matthews work is very subtle,give it a look....www.matthewhillstudio.com

Re: Cremation Urn -- Help Needed ASAP

#5

Richard Allen

Re: Cremation Urn -- Help Needed ASAP

Richard Allen

>I have made an urn for my Father In Law, my Dad and most recently for one of my best friends.

Whatever you make will be appreciated. I very much suspect that they have asked you to make this urn because they like your work.

Go with what you do best and make this urn a container that contains the love you have for your friends and their son. If you do that it will be perfect.

Re: Cremation Urn -- Help Needed ASAP

#6

Re: Cremation Urn -- Help Needed ASAP

Russ Fairfield

>I have found there are only 2 things that upset people about a funerary urn -- it isn't big enough, or the lid comes off if it gets tipped over or falls on the floor.

Big enough is easy. The conventional wisdom is 1 cubic inch per pound of body weight. That works most of the time, but it isn't 100%. Why take a chance? Add 20% and be sure.

There are a lot of ways to make a locking lid. Screws look tacky. A screw-on lid works. So do wood pegs in pre-drilled holes. I prefer a twist-lock lid because it works and can be opened of they ever want to, but it can be difficult to make and warpage in the wood can be a problem.