Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Premium Domestic, Figured & Live Edge Hardwoods in Stock. Best Prices for Serious Woodworkers.

Rosand help & the Grumbine Gizmo

Posts

Rosand help & the Grumbine Gizmo

#1

Rosand help & the Grumbine Gizmo

Mike Cunningham (Cape May NJ)

>I just returned from a visit with two turning mentors and friends. I spent some time with Bob Rosand picking up my portion of Big Leaf Maple Burl that we ordered. Bob was his usual gracious, generous and hospitable self; answering questions and giving me lots of pointers and help, most particularly with the skew. I would strongly recommend that anyone looking for instruction, particularly with spindle turning contact Bob. You can do so through his website at http://www.rrosand.com/index.html

On my way back to south Jersey I stopped by Bill Grumbine's for a visit. As always Bill's shop is open to any traveler who appears at his door, even me. I'd also recommend you seek out Bill for instruction, most particularly for bowls and vessels.

While snooping around, looking at the huge planer/jointer/saw/ shaper/etc machine (forget what it's called), The American Beauty (The lathe...not Bill) I happened upon a fantastic device, a new tool developed by Bill. This is exactly what's needed by anyone trying to find the bottom of the bowl, or more exactly, where the interior bottom is, in relation to the exterior.....no one wants to make funnels!

This thing is made of beautiful machined steel and fully adjustable for any size lathe (even a model for minis), has an adjustable rod that reaches into the bowl or vessel to the bottom and above a high quality laser that projects onto the exterior exactly where that inside bottom is. The thing has to be seen...fantastic. I think Bill calls it The Bottom Line Bowl Depth Gauge. Anyway, the device is extremely well made and best of all fool-proof..........I'm ordering one!

Not how I spent my summer vacation but the last few days.

Mike

Re: Rosand help & the Grumbine Gizmo

#2

Re: Rosand help & the Grumbine Gizmo

Robert Jay

>Mike,

How much is that contraption? When you say foolproof, How big of a fool does it go up to? I use his 2 dowls and a stick tool from his first video and I have been fooled on occasion which was no fault of the tool, just the fool. I tried it on this piece and got the stick stuck in there for two days! Just kidding but I did use it on this. Now if I just used more sandpaper...

Robert


img

Re: Rosand help & the Grumbine Gizmo

#3

Re: Rosand help & the Grumbine Gizmo

Mike Cunningham (Cape May NJ)

>Hi Robert,

I believe the full size version is $95 and the mini $85. We played with it on his Robust (The lathe, not his chest), which I recall is around 26" or 28" and it centers on that and is adjustable up and down. As for reach, I don't know exactly but as deep as anything that you, I or even deep hollowing Andy does. Also, the design facilitates the use of a high end laser rather than one of the cheapies, long battery life.

Mike

Re: Rosand help & the Grumbine Gizmo

#4

Bill Blasic

Re: Rosand help & the Grumbine Gizmo

Bill Blasic

>I bought the full size version from Bill at the Buckeye clubs hands on with Bill. Extremely helpful in staying away from funnels. :>)) Worth every penny.

Bill

Re: Rosand help & the Grumbine Gizmo

#5

Andy DiPietro

Re: Rosand help & the Grumbine Gizmo

Andy DiPietro

>Hi Mike,

I believe Bill brought the prototype of the bowl depth gauge when he demoed at the DelVal club. It looked well made for the price and I think it is a good idea for bowl turners. It looked quick and easy to use too. I would like to see a picture of the finished design.

Thanks

Andy DiPietro