Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Abingdon, VA – Tree Cutting & Portable Sawmill

Talon/NOva G3

Posts

Talon/NOva G3

#1

Talon/NOva G3

Dennis Taylor

>I currently own the Talon chuck, and have been in the market for a 2nd chuck for sometime now, just haven't put out the cash, well I seen a good price on a body only Talon, and also Woodcraft has the G3 on sale, with the insert for 119.00, which is almost the cost of the nova body only.....it seems to me that the Nova has more jaws available, my thinking was use the Talon for bowls and the Nova with the pin jaws for ornaments and the such, smaller items.....any recommendations?.....any opinions?.....Dennis

Re: Talon/NOva G3

#2

Re: Talon/NOva G3

Allen Neighbors

>You'll get more opinions on this than almost any other question.

Mine is: :)

The Oneway Talon jaws are the only jaws that will fit the Talon. If you want different size jaws you have to buy another set. And if you get a different Oneway Chuck, the same story.

All Nova Jaws fit all Nova Chucks now, except the 3-hole Titan Powergrip Jaws. If you get a Nova chuck, and later another Nova, the jaws will all interchange.

My cent-and-a-half. Now let's see the other posts.... :)

Re: Talon/NOva G3

#3

Re: Talon/NOva G3

Bill Howatt

>I'll leave the definitive word for somebody who has actually done it but I believe many Nova jaws other than the Titan's fit the Talon.

Bill

Re: Talon/NOva G3

#4

Bill Blasic

Re: Talon/NOva G3

Bill Blasic

>I have three G3s, the best price I paid was $125. I think it is a very nice chuck and it works very well not counting the fact that yes all jaws fit all chucks except one jaw set. Yes I believe that the Nova jaws will fit the Talon but the Nova jaws do not have the safety pin in them that the talon jaws have so do that at your own risk.

Re: Talon/NOva G3

#5

Re: Talon/NOva G3

Pascal Oudet

>I use a Vicmarc 100 and a 120, and have been lucky to win a G3 at a raffle in Louisville. I say lucky because I have won, not because of the G3 (actually I didn't know the G3 and had to choose between a Supernova2 and a G3. I thought "G3" has a higher number, and is newer, so it must be better. Ouch ! how wrong I was). frankly, it's not a very good. Teknatool makes some very nice machines, but this chuck doesn't fit in this category. I've used it from time to time when I was to lazy to change the jaws on my Vic. in those cases, I quickly put down the G3 and came back to the Vic. I find the holding power is much lower. long (even not that long) pieces vibrate when you "push" a little too much during the cut (not the case with the Vic. not what I've experienced either with the Oneway's I used). I really don't recommend it.

Pascal

Re: Talon/NOva G3

#6

jaws types

Dennis Taylor

>The Nova has a 1" set of jaws for small work, is there something similar in the Oneway line to fit a Talon.....I have the jaw sets for the Talon for bowls, but like the Nova short 1"(25mm) jaws and the extended pin jaws, wish there was something similar for the Talon, I would just go that route....anyone iknow of these?...Dennis