Latest Round Thing
Julie
>He is a Magnolia bowl I made on friday. Still need lots of work, and gotta figure out how to finish the bottom .
thanks for taking a Peek
Knowledge You Can Build On — Est. 1998
Latest Round Thing
Julie
>He is a Magnolia bowl I made on friday. Still need lots of work, and gotta figure out how to finish the bottom .
thanks for taking a Peek
Re: Latest Round Thing
Julie
>another view. bad lighting
Re: Latest Round Thing
Julie
>one last view, sorry for the bad lighting
Re: Latest Round Thing
JL
>The way I was "taught" was to do the bottom first - I use a woodworm screw and my chuck. I define the bottom and leave a "dovetail" insert for my chuck.
Other methods I have used involve putting a set of Jumbo or Mega Jumbo jaws on a chuck and refining the bottom.
Re: Latest Round Thing
Jennifer@Indy.USA
>Julie, I really like this bowl. The form is very gentle and looks like it would feel comfortable in the hands. Nice job.
Jen
Re: Latest Round Thing
Mike Stafford
>This looks like a very pleasing bowl to nestle in one's hands. The form is pleasing and the finish looks soft and smooth. Not much else one can ask for, IMHO. Very nice!
Re: Latest Round Thing *LINK*
john lucas
>Julie It looks very nice with a nice smooth curve. good job. I have posted a link to our club website. If you go under the tips and techniques I have a tip on reverse turning methods for bowl bottom. you might find something you can use.
When I first started I kept a scrap of wood that was as big as my lathe would handle. I would turn a groove that perfectly fits the lip of the bowl. Then I would use the tailstock to hold the bowl in place and turn the bottom, all but a little tenon. Then I would carve that.
You could also hot glue it to the ring but this is a little less secure and you have to clean off the glue.
You can use that piece of scrap wood a bunch of time before it gets too many grooves and too thin to work.
http://www.cumberlandwoodturners.com/