Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Fast and affordable laser cutting – so you can make the parts you can’t find anywhere else

Turned ant pics

Posts

Turned ant pics

#1

Turned ant pics

Paul Zerjay

>Anyone got a link to some ant pics? TIA

Re: Turned ant pics

#2

Re: Turned ant pics

adrien

>Paul: use the search function. there have been several pics of wooden ants on this site. You might also look for pics of the real thing to get the right proportions and anatomy. Here's one of mine:


img

Re: Turned ant pics

#3

Re: Turned ant pics

robert davis

>here are some turned ants and other critters


img

Re: Turned ant pics

#4

Re: Turned ant pics *LINK*

charlie belden

>How about these? If you want to play with

multi-axis turning, turn the three parts of

the body on slightly different axis to get

a slight arch to the body.

Each leg has a ball on one end and a slight point

on the other allowing for the look of joints.

Drill shallow holes in the body where the ball

end of the legs meet the body for some glue

area. For subsequent legs repeat drilling a

shallow hole in the ball for the point on the

end of the previous leg for glueing point to

ball. The last leg segment has a ball on both

ends. These were done with a 1/2" curved

edge skew and the small diameter legs and

antenae were done with a 1/16th inch

parting tool used like a little bedan. If you

start at the end of the blank held in a chuck

and turn to finished diameter completely

before moving back towards the head stock

it's not that hard.


Ants & Ahnks

Re: Turned ant pics

#5

Red ant 

ChuckS

>


img