Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Support WoodCentral when buying things you need

Turning ipe

Posts

Turning ipe

#1

Turning ipe

Steven in the Iron Range

>Has anyone turned any ipe or is it too hard? I recently aquired some and was wondering what to do with it.

Re: Turning ipe

#2

Re: Turning ipe

Stuart Johnson

>I'm in the process of turning a segemented vase using IPE. So far it seems to run okay. I made a seam press out of a piece of scrap and it has a nice color with Danish Oil.

Re: Turning ipe

#3

Re: Turning ipe

Dale Cook

>Yes, I only had small pieces so I used them for finials and they turn great and take a finish such as lacquer very well.

Re: Turning ipe

#4

Re: Turning ipe

IAN

>you must of been reading my mind.

I just finished this segmented vase out of ipe and maple.

IAN


img

Re: Turning ipe

#5

Re: Turning ipe

Craig Daymon

>Careful of the dust. That yellow dust in the pores is the reason bugs don't like it and the reason you should be cautious when turning it.

I turned a goblet stem out of it years ago, but I was just playing and not very serious about turning at the time so I can't give much feedback.

-Craig

Re: Turning ipe

#6

Re: Turning ipe

Bill Crommett

>You will probably notice that Ipe is abrasive, so keep the grinder handy.

Re: Turning ipe

#7

Re: Turning ipe

Jim Miles - Charlotte N C

>Ipe South American - also know as Greenheart.

Very hard dense wood, has a unusual smell and a green tint inside ( Greenheart ) some color variations, finishes out to look about like Walnut. Starting to be used as exterior decking, local lumberyards ( not big box ) may sell it, will sell damaged boards cheap, or ask who installs it and they will have plenty of scraps being thrown out. I use it in segmented work - seems to work fine.

Story: My local lumber yard had special ordered a pallet of Ipe and sold about 80% of it. , the pallet under it ( not Ipe ) was a dark reddish wood with three 10 inch wide boards making up the pallet, I just knew I had hit upon some really nice foreign wood, asked the lumber yard to save the pallet for me, took 6 months to sell rest of the Ipe, Took the pallet home, tore it apart knowing it was going to be something special. Planed a piece - was't reddish inside at all - some of the plainest - non descript wood I ever saw!

Re: Turning ipe

#8

Re: Turning ipe

Scott Walton

>I've turned alot of it, from pens to bowls with great success. Very hard! Stunning when finished. I love the way it takes OVT (oil 1 part, Varnish 2 parts and 3 parts turpentine) and has a great soft sheen.

I agree with the poster... keep the grinder nearby.