Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

This $39 jig will make you a WOODWORKING GOD!

For Steve K - faceplate centering

Posts

For Steve K - faceplate centering

#1

For Steve K - faceplate centering

Carole Valentine

>Steve, this is the little MDF centering thing for my chuck mounted faceplate.


img

Re: For Steve K - faceplate centering

#2

Re: For Steve K - faceplate centering

Carole Valentine

>Allen's method works just as well, but I usually have a dimple where I drew the circumference of the blank before I cut it on the bandsaw so that's why I use this.

Re: For Steve K - faceplate centering

#3

Re: For Steve K - faceplate centering

Wilford Bickel

>Carol - the difference in your unit and mine is that when I turned my piece of MDF to fit the ring I then hammered a 8 penny nail into the tail center dimple and cut it off about 1/8 inch long with a set of diagonal cutters. Then like you I have a center punched dimple in my piece from marking my circle and this cut off nail will fit right into it. These work great and the price is right!!

Re: For Steve K - faceplate centering

#4

Re: For Steve K - faceplate centering

Steven Kubien

>Thanks Carole. A couple of those rings are mentioned in my letter to Santa.

Cheers,

Steve Kubien