Spalted London Plantree
Mike Cunningham (Cape May NJ)
>Put this on the lathe this morning, 23 1/2" diameter and rather heavy. I harvested this along with some other quite nice hunks of wood with a few friends a week or so back.
Mike
Knowledge You Can Build On — Est. 1998
Spalted London Plantree
Mike Cunningham (Cape May NJ)
>Put this on the lathe this morning, 23 1/2" diameter and rather heavy. I harvested this along with some other quite nice hunks of wood with a few friends a week or so back.
Mike
Enroute
Mike Cunningham (Cape May NJ)
>Here it is with the exterior partially roughed
Mike
Further along
Mike Cunningham (Cape May NJ)
>Here the exterior is just about finished, 22".
Mike
Another angle
Mike Cunningham (Cape May NJ)
>Here a view in profile
Size reference
Mike Cunningham (Cape May NJ)
>This shot gives some idea of the blank size. It's mounted on a VL300.
Mike
Re: Size reference
Dan Oliphant
>That looks like it is going to turn out to be a wonderfull piece. Am not familier with that species, can you please enlighten me as to how it works, color changes, pore structure etc.?
Think sycamore
Mike Cunningham (Cape May NJ)
>London Planetree is a hybrid between the sycamore and Oriental planetree. It's abundant in Europe. The leaves are very similar to those of the maple and at first glance will confuse you until you look at the bark and grain which are extremely similar to the sycamore.
This piece is creme through tan in color with some spalt lines mostly toward the bark side. It's nice but unfortunately not heavily spalted.
Mike
Re: Mike, you get the best wood! :)
Allen Neighbors
>