Craigs List ? *LINK*
Posts
Re: Craigs List ? *LINK*
#2Re: Craigs List ?
HeatherA in Alaska
>Julie, buying off craig's list is just like buying something off the classified section of the paper. There are no promises made by the craig's list people themselves. You have to look at the item carefully yourself. I suggest that if you are not familiar with that particular lathe that you take someone with you that would know what to check out. That being said, most of the woodturners that I have met are great people and hopefully this person isn't trying to rip you off. Make sure that you turn it on, maybe even have the seller mount a blank and check out how it runs. I do not know anything about the particular lathe that you are looking at. I recently bought my powermatic 4224 with outboard extension, free standing tool rest and every tool rest that powermatic makes for $1000 off of craig's list. Things often do not last very long if they are a good deal. Good luck with your decision.
Heather
Re: Craigs List ? *LINK*
#3Vega 2400/2600
Ralph
>I can't answer to the price, but it's probably close. My general rule of thumb is 50% of list, or 60% of sales price.
As to the lathe, I looked at one seriously a couple years ago, I was reasonably impressed. Of the three people I know that own one, only one is unhappy with it.
Re: Craigs List ? *LINK*
#4
Price is good, but shipping might kill you...
steve antonucci
>The lathe is big and very heavy. Moving it by yourself would be hard, and unless you've got some strong friends and a truck and are close enough to Maine to pick it up, I'd leave it.
The lathe is a pretty good lathe (I've used one at Bill Grumbine's place), and well made. If it's mechanically sound, the price isn't so bad vs. the new ones.
Steven
Re: Craigs List ? *LINK*
#5And it's on WC, too! *LINK*
Jack Savona
>It's my lathe and it's been listed on the WC Classifieds for a day or two, along with my Jet 1236. My new 3520B is waiting for me at Woodcraft as soon as I make space for it in the basement.
Vega Listing on WC
Re: Craigs List ? *LINK*
#6Heather that was a great deal, good going! :-)
Clem Wixted
>
Re: Craigs List ? *LINK*
#7
Re: Vega 2400/2600
Dick Hines
>I have never priced one but I saw Bill Gruumbine turn on one at the NC symposium. If it will stand up under his heavy cutting they must be very well built lathes.
They do look a little strange compaired to other lathes though. Short and boxy compaired to long and lean.
Re: Craigs List ? *LINK*
#8Re: Craigs List ?
Don at Central Illinois
>I think it's a great price. I have turned on a couple of older model Vega's and if it were closer I'd buy it. But central Illinois is a looong way from Maine, even for a $1300 Vega.



