Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Good Hope Hardwoods - Walnut Slabs & Specialty Hardwood Lumber

PM-4224 new baby in the garage

Posts

PM-4224 new baby in the garage

#1

PM-4224 new baby in the garage

John Kyler

>Man I was able to move the old Woodfast around and scoot it all by myself.. The mustard monster is more than I can move at all. But the atv in 4x4 low pushed it into place!

Now back to our regularly scheduled turning.

Anyone know of things that might need to be done, modified, re-programed?

John

in Colorado

Re: PM-4224 new baby in the garage

#2

1014vsi also in the garage

John Kyler

>Got this one for my 7yo daughter for Christmas.

Re: PM-4224 new baby in the garage

#3

Re: PM-4224 new baby in the garage

Ken

>Don't forget to plug it in,sorry coudn't resist.Congtrats on the new toy.By the way how big is that bugger?I don't know to much about the PM's.

Re: PM-4224 new baby in the garage

#4

Re: PM-4224 new baby in the garage

John Kyler

>Right now trying to figure out how to wire the plug..

Better part of 900lbs..

I'm 135lbs..

Round one TKO

Re: PM-4224 new baby in the garage

#5

Careful....

wilbur

>Make sure that 1014vsi doesn't get too close to the PM-4224. Otherwise, it might get sucked into its graviational field.

Re: PM-4224 new baby in the garage

#6

Re: PM-4224 new baby in the garage

r thomas

>john, I ran a 220 line behind my pm-4224 and put in a small 220 breaker box. I then wired the pm directly to one of the 220 breakers that way I can turn off the power when not in the shop. this also me a close run to the vacum pump and dust collector. supposely this gives some lightning protection. I have enjoyed my pm and have turned enough to pay for it and then some. hope this helps

Re: PM-4224 new baby in the garage

#7

Re: Moving it PM-4224 new baby in the garage

Bill Hale / The Wood Spinner

>Rember folks, you can use viberation to help move a lathe before you bolt it down. Mount an off center piece and up the speed to where it almost walks. A light push and it goes where you want it with little effort.

Good turning and be safe

Bill in CG, AZ.