Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

THE WOODRAT IS BACK!

Humble beginings

Posts

Humble beginings

#1

Humble beginings

Robert Jay

>I came across this photo the other day. It was the first piece I turned on a lathe two and a half years ago. I remember standing in front of my used Delta lathe that I purchased on Craigs list for a hundred bucks with an old gouge in my hand and a chunk of Walnut bertween what I would later learn was centers.In between cuts I was reviewing the article by Rude Osolnik on how to make a weed pot that I had laying on the bench next to the lathe. My initial thought was "This isn't so hard". The next day I tried a bowl and the bowl won that battle. Of coarse I did not know end grain from grain alcohol, or what was more dangerous, but I persisted and after six months of being a target for flying wood I joined the Del Val Turners Woodturning Club where I have since learned much from both the demonstrators, club videos & DVDs and some great fellow members. This summer I took a 3 day workshop with David Ellsworth which I really gort a lot out of and next year I will be teaching a Hands on Workshop to some new guys or gals that are at day two. I would like to thank you all who have posted here on Wood Central as this site too has been part of my learning process. I intend to continue the learning process till the day, hopefully many years from now, when they pry the gouge out of my decrepit old hand and carry me away to be turned into dust and placed in a finely turned wooden urn of my making.


img

Re: Humble beginings

#2

More Humble Beginnings

Rick Urban

>I have yet to meet a turner who's beginnings were not pretty humble. This is my first, a vintage 1959 junior high school shop masterpiece! I still have it.


img

Re: Humble beginings

#3

Re: Humble beginings

Cyril Griesbach

>One day, when my mother passes, I'll get my first bowl back and consider posting it. If I did so now I'd be in third place in this thread. If ten more folks posted their firsts I'd drop to thirteenth for sure. But....it's been a fun ride from there.

Re: Humble beginings

#4

Re: Humble beginings

Robert Jay

>It sure has been a fun ride. I just forgot where I came from for a bit.

Re: Humble beginings

#5

Re: Humble beginings

Allen Neighbors

>To be honest with you, this piece would look outstanding in my Sister's home in New Mexico. She has alcoves, and arches in her home filled with different pieces. She absolutely loves SW art, and to me, this is a piece of art. Humble or not, I like it.

Re: Humble beginings

#6

Re: More Humble Beginnings

Julie

>Here is my shop master piece . 1974


img

Re: Humble beginings

#7

Re: Robert- one of Rude's favorite .....

Jamie Donaldson

>... sayings was that "the only place you learn how to turn is standing in front of the lathe." I believe we all continue to learn every day we assume that position.

Re: Humble beginings

#8

State of the Art

tek-Brunswick, Ohio

>Wow! Laminated turnings were State of the Art back then. I have a couple from back then. From a distance The Cherry and walnut layers on mine look quite similar. They were finished with Watco and age has Turned the Cherry darker and the /walnut lighter.