Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

THE WOODRAT IS BACK!

mahogany?

Posts

mahogany?

#1

mahogany?

JohnKJordan in East TN

>How's mahogany for turning?

I've got a beam of mahogany that's been indoors in use as a mantel since the early '70s. This piece is 8" x 9.5" x 96", about 50 board ft.

I'm not sure the type of mahogany but it doesn't seem to be as heavy as what is labeled as african mahogany at the local woodcraft store. Cut with a sharp knife shows a smooth, fine-grained surface. It cuts easily, would probably be wonderful for carving. Under the microscope the rays are distinctive, quite wide on the radial surface. Pores are one-wide between rays, often doubled, many tyloses. Color is red-brown. From various photos it appears closest to Honduras/American/Genuine mahogany.

I'm trying to decide what to do with it - saw it for lumber, cut some turning stock. I know the various mahoganies are widely used for furniture making. How is it for turning? It would make a lot of 8" or 9" turning blocks.

JKJ

Re: mahogany?

#2

JL

Re: mahogany?

JL

>I was given some in the turning exchange last year. It turned great. Now I have to turn a suitable seat for the legs and stretchers :).

Re: mahogany?

#3

Re: mahogany?

Ruth Niles

>John, I use it quite a bit and it's nice to turn. It looks great with a finish. I've never turned bowls, just something about a "mahogany bowl" doesn't sound appetizing. I've turned boxes and ring dishes plus ring holders (ala Rosand).

Try it, you'll like it.

Ruth

Re: mahogany?

#4

Steven Antonucci

The agony...

steve antonucci

>Oh, such decisions...

You can always buy lumber in 4/4 if you need it, but air dried mahogany of that thickness won't be found. You could probably cut it up into turning blanks, sell a few, keep the rest, and use the money to buy the flatstock you would have gotten out of the board if sawn...

Steven

Re: mahogany?

#5

Re: mahogany?

Allen Neighbors

>JK, from your description, it sounds like the mahogony my son brought me that he picked up in Mexico. If it's the same, it turns beautifully. I turned a platter and a couple of chalices from it, and it was gorgeous finished with DO.

Re: mahogany?

#6

Re: mahogany?

john lucas

>John I turn a fair number of mahogony mirors. I love the way it turn's and finishes.

Re: mahogany?

#7

Bill Blasic

Re: mahogany?

Bill Blasic

>I have a good supply of kiln dried African Mahogany and the weight of the wood can really vary, for example a 4 X 4 X 12 may weigh 5 lbs the next piece the exact same size may only weigh 2 lbs. It does turn beautifully and takes a good finish and even looks great when turned into a bowl as I have made a few. It also carves well.

Bill

Re: mahogany?

#8

Re: mahogany?

bowlman

>Mahogany is TERRIBLE for turning! So, just send it to me and I'll dispose of it properly. Seriously, I have been looking for some old mahogany beams, 5x5 or thereabouts. Perhaps we can work out a deal?

Re: mahogany?

#9

thanks for all the comments

JohnKJordan in East TN

>>Seriously, I have been looking for some old

>mahogany beams, 5x5 or thereabouts.

Based on comments here and elsewhere, I've already started cutting it into chunks. Once I got a few inches away from the end there was some good clear wood - I cut a few turning blocks up to about 8"x8"x7" and took some to Gary Evans this afternoon. I tried turning a piece and it looks like it will be fun.

Gary has some great stock, BTW, including some old dry walnut beams 4x4 and larger.

Thanks, everyone, for the comments.

JKJ