Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Nearly 100 Exotic Wood Species, Direct-Imported Since 1972. Shop Slabs & Turning Stock.

To big to lift

Posts

To big to lift

#1

To big to lift

Bill Hale / The Wood Spinner

>I have talked before about using a guantry to help mount wood on the lathe. Here is a pic of an Oak Burl going on to a 2436. No way I could hold to mount. It was all I could do to get it set on the lathe bed.

Good turning and be safe

Bill in CG, AZ.


img

Re: To big to lift

#2

Re: To big to lift

Jack Riley

>Bill...I picked up one of these lifts at Harbor Freight a good while back and it is perfect for holding large blanks safely while attaching to my 2436. I originally acquired the lift for something else and now find that it is very useful for many tasks. http://www.harborfreight.com/cpi/ctaf/displayitem.taf?Itemnumber=41145

Re: To big to lift

#3

Steven Antonucci

You need to work out more :-)

steve antonucci

>That little thing? That's a one hander while the other turns the spindle...

Seriously, I'd be scared to turn the lathe on above 100 RPM with that burl...

Steven

Re: To big to lift

#4

Re: You need to work out more :-)

Bill Hale / The Wood Spinner

>It was not to bad for balance when I finally got it set.

I tend to turn a little fast, started at 400.

Bill