Raku - large
JohnKJordan in East TN
>Funny you should mention Raku. I helped my potter friend Paul Menchhofer pull a pot out of the kiln just last night. We don't know for sure, but Paul may have the distinction of producing the larges raku-fired pots in the world. It was too hot to measure, but I think the piece yesterday was at least 4' high.
Paul developed a system to raku fire very large pots. He throws them in four or five sections, assembles, bisque fires, then raku fires. Since the pots are way too big to manhandle as in normal raku, he pulls a cart holding the piece out of the kiln and positions it under a large stainless steel can containing strips of paper. The can is lowered and quickly sealed around the bottom. The paper catches on fire, removes the oxygen, and creates the reducing atmosphere.
The one he pulled out last night was the largest he's ever done so it may well be one for the record books. He had to rebuild his largest kiln just to fit that pot.
The sequence below from last night shows the can being lowered over the pot. The pot comes out of the kiln at 960 C. The last picture is of some earlier, smaller pieces.
Good clean fun!
JKJ
