Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Need a tree taken down or milled?

What's on your holiday list?

Posts

What's on your holiday list?

#1

Steven Antonucci

What's on your holiday list?

steve antonucci

>I only want three things this year- Woodcraft sent me an e-mail confirming one already (even though the wife asked for them not too)

1.) 2nd chuck body to cut down on swapping jaws (confirmed)

2.) a peavey- if you handle big logs, they're really worthwhile- and Tractor Supply is having their Grand Opening just in time!

3.) a bowl coring unit- tired of putting more wood on the floor than in a bowl

What's everyone else want?

Steve

Re: What's on your holiday list?

#2

Re: What's on your holiday list? *LINK*

JohnKJordan in East TN

>>2.) a peavey- if you handle big logs

Do you really want a peavey or actually a cant hook? It might depend on what you are going to do with it. A peavey has a point or spike in the end, which I understand was widely used to guide and handle logs floating down the river. The link below has some more info. A cant hook has no spike but just a dog to grab the side of the log opposite the hook.

I use cant hooks often on and around my sawmill. I believe for my use the spike would just get in the way.

If you want advice from the pros, check on the sawmill forums. I have some links if you want them.

I found the bigger the cant hook the better. I first bought one with a handle about 4' long. After I got a larger one (about 5' handle), I haven't used the smaller one. The big one gives much better leverage and the hook is larger which really helps on those big logs, especially if the bark is removed. I sometimes wish I had an even larger one.

BTW, another think I can't do without for log handling is a pair of large (25") skidding tongs. I not only use them for skidding, but use them to lift logs with the front end loader on my tractor. (I have two grab hooks welded on the top of the bucket and keep short pieces of 3/8" chain on the tongs.) Note that lifting with skidding logs is not OSHA approved but OSHA hasn't found my house yet.

JKJ


cant hook or peavey?

Re: What's on your holiday list?

#3

Re: What's on your holiday list?

john lucas

>I want some vacation time, and the money to actually go on one. Or how about a weekend with David Ellsworth.

I'm going to search for some tongs like John mentioned. I had to get some wood from a friend a few weeks ago and he had a pair. We hooked them onto the end of a log that was near the bottom of the pile and just pulled it out with my Toyota and a chain. Man that was nice.

I'm still drooling over a bigger compressor. Especially if it's quieter.

Re: What's on your holiday list?

#4

Steven Antonucci

I think the peavey is more versatile, no?

steve antonucci

>My understanding is that the cant can be used to rotate and roll a log, but isn't able to lift it off the ground. A peavey's point gives you leverage to also lift a log and hold for trimming (with another person cutting...)

I originally thought I wanted a cant, but someone told me to get a peavey instead...

Steven

Re: What's on your holiday list?

#5

Re: What's on your holiday list?

Tim GC

>Time to do a little turning ... little hope though, 3 kids and Christmas ...

Re: What's on your holiday list?

#6

Re: What's on your holiday list?

jeff myroup

>A jet 12-20 mini to set up in the basement to do some small stuff, when the weather is to cold to be out in the shop. My wife is going to Canada to see family for the holidays, and I will be home with the dogs. So I know she already bought it out of guilt :)

Jeff

Re: What's on your holiday list?

#7

Re: I think the peavey is more versatile, no?

JohnKJordan in East TN

>There is a thing called a log jack made specifically to roll and lift a log. I have one but find it more trouble to use than worth it. If the log is short, it's hard to control. If the log is large diameter, the log jack I have can't get a grip (the one I have is smaller than my cant hooks).

I find it just as easy to trim a small log by lifting it off the ground with my foot. I either roll a large log onto a branch or something to get it off the ground a bit, or most of the time I don't move it to trim - if you hold the chain saw horizontal it will stay out of the dirt and the last tiny bit next to the ground can usually be broken off with a kick, or if not, touched carefully with the tip of the saw, again, without touching the dirt. BTW, in the woods I try to lay the log down on branches as I limb and buck to keep it off the dirt.

I don't have any experience with the peavey but I'm having trouble visualizing how a peavey can easily lift a large log off the ground. If you grab it with the hook and pry back towards you, seems like the spike would just sink into the ground rather than lift the log. I suppose you could just pry it with the point, but I carry a separate steel pry bar on the truck for that.

What do you want to use it for? Bucking a felled tree in the woods, reparing and loading logs onto a truck or trailer, slicing up logs to prepare for woodturning, ???

If you haven't done so, maybe you can try out the various tools before you spend a lot of money (none of them are cheap). A local saw mill or tree service company may have these and let you play.

JKJ

Re: What's on your holiday list?

#8

skidding tongs *LINK*

JohnKJordan in East TN

>>I'm going to search for some tongs

John L.,

The worst place I found to buy skidding tongs was at farm stores and co-ops. The best place I found was an industrial rigging supply house - they were cheaper and bigger.

The place I use is Volunteer Wire Rope in Knoxville, 865-546-8613. I also bought cant hooks, pry bars, tree slings, towing straps, tie-downs, rope for tree felling, chain, and safety equipment there.

Hey, here's a deal for you - if you can use smaller tongs I have a pair I'll either give you for Christmas or trade you for a piece of wood or something if you make it back over this way. (We live a couple of miles north of Clinton). I bought a pair size 3/4"x16 that measure about 10" from pivot to points (compared to the larger set I use, 1"x25" measuring 15" from pivot to points). I have not used the smaller tongs since I got the larger. The smaller size still works fine for skidding most logs (their intended purpose) but the larger tongs work better for lifting with the tractor bucket.

Here's a page that shows what sizes they make:

http://www.traditionalwoodworker.com/default.php?cPath=36_339&gclid=CMm8qO-3ipACFQp7PAodymjkuQ

The link below is the Knoxville supplier I use.

JKJ, on permanent vacation and loving it


Volunteer Wire Rope

Re: What's on your holiday list?

#9

Steven Antonucci

Mostly handling logs on the ground

steve antonucci

>Moving logs, and or tree that have been bucked into sections larger than I can manipulate by hand or pull with the truck. In addition, I see lifting to put distance between the dirt and the bottom of the log and preserving the chainsaw.

I'm under the impression that a peavey can do what a cant can do, but not the other way around...but a cant , well can't...

I won't use either every day, but on days when I have one, I'll be happy.

Steven

Re: What's on your holiday list?

#10

Dick Hines

Re: What's on your holiday list?

Dick Hines

>I only ask for one thing for Christmas...... Jan 3. By then all the hussel and bussel is over. My wife's and my birthdays are over and New Years is finished. You know, I get what I ask for every year.

Re: What's on your holiday list?

#11

Re: What's on your holiday list?

Donna Banfield

>Christmas...birthdays...anniversaries...it's all things woodturning!! Anything having to do with turning or carving...I need it...I want it...I'm happy to have it! (therefore I'm easy to buy for).

But things I'm really hoping I get this year....the Triton sawhorse/clamp from Woodcraft. I've been doing some chainsaw carving of birdhouses, and they really make a mess in my shop. Doing it outside would make it a lot easier. I've also used a bowl adze to hew out my first bread dough bowl. Clamping the half log onto my work bench was an engineering feat! Both the birdhouse and the 'doughboats' would be easier to work on with one of those Triton jaws.

And a detail gouge from Doug Thompson!! Not that Doug is going to give me one ;^), but that someone is going to BUY it from him, and then give it to me for Christmas.

See!! I am easy....(but not cheap)!! :^)

Re: What's on your holiday list?

#12

The new Escoulon chuck

Bob Elliott

>

Re: What's on your holiday list?

#13

Re: Mostly handling logs on the ground *LINK*

Jorge Castaneda~Downeast Maine

>Hi Steve,

The spike of the peavey was used when they sent log rafts downstream, the men had to stand on the logs to work and the spike was used to stab and push the logs to where they were meant to go. It really does not make any difference in actual use to have the cant hook and the spike or just the cant.

The most common cant hook in use around here, is the one with a 3'handle, but as John told you they are available in bigger sizes too, I had a 4' one, but the hook was way too big for the trees around here, so it really depends on what trees are you going to be handling.

The peavey and cant hook were originated very near here, when Bangor ME was the lumber capital of the world, Peavey Manufacturing is still extant and you can find info in the link, they make a whole line of tools for forestry.

Jorge


Peavey Mnfg

Re: What's on your holiday list?

#14

DT detail gouge

Jorge Castaneda~Downeast Maine

>Donna, I hope you get Doug T. detail gauge, I just was using mine and I love it, it is becoming my everything gouge.

Jorge

Re: What's on your holiday list?

#15

Air cleaning rig

Jorge Castaneda~Downeast Maine

>a much needed piece of equipment here.

Hope I get it!

Re: What's on your holiday list?

#16

Amen

Jay in Tx

>I'm with ya brother... and tack on fulltime master's student and sole provider of da bacon for the house (that's why I'm up this late!)

Re: What's on your holiday list?

#17

I couldn't wait and I haven't been good

Jerry Hall

>so I went ahead and bought the new Sorby multi access chuck :)

Couldn't take any chances.....

Re: What's on your holiday list?

#18

Steven Antonucci

Thanks- now I want a Timberjack!

steve antonucci

>