Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

A55 Smoothing Plane

Looking for super fine sanding pads

Posts

Looking for super fine sanding pads

#1

Looking for super fine sanding pads

Scott Hurley in N. VA

>When I was at Totally Turning (2006), I picked up some foam-backed sanding pads that were 800-1200 and 1500-2000 grit. They were sold as regular abrasive, not micro-mesh. Anyhow, I need some more, and don't remember the name of the company that sold them. Does anybody know where I can get them? None of the usual companies (Klingspor, Packard, etc. seems to carry them. Any help would be appreciated. Thanks.

Scott

Re: Looking for super fine sanding pads

#2

If memory serves

Mike Cunningham (Cape May NJ)

>Scott,

Your speaking of the Sanding Glove:

Phone: 757-665-4597

Mike

Re: Looking for super fine sanding pads

#3

JL

Re: Looking for super fine sanding pads *LINK*

JL

>Webb Abrasives has some foam sanding pads (detail pads) that are pretty fine (super fine and micro fine) - I don't know if those are what you are looking for. I got a sample pack of some of their products a while back. The super fine and the micro fine were above (below?) 400 in grit size.


Webb Abrasives Foam Pads

Re: Looking for super fine sanding pads

#4

Link  *LINK*

Mike Cunningham (Cape May NJ)

>


The Sanding glove

Re: Looking for super fine sanding pads

#5

Re: Same topic,Looking for super fine sanding pads

Mike Nelson

>Do they make finer than 0000 steel wool?

Re: Looking for super fine sanding pads

#6

Re: Same topic,Looking for super fine sanding pads

Mike Cunningham (Cape May NJ)

>I'm not aware of anything finer than 0000 but take a look at Liberon's 0000, many feel that it's actually finer than other 0000

Mike

Re: Looking for super fine sanding pads

#7

Re: Same topic,Looking for super fine sanding pads

Carole Valentine

>Sanding Glove has #000000 Easy-Sand steel wool sheets. It comes in 9x11 sheets for $2.50@. I use it a lot but it will shed fibers like any steel wool.

Re: Looking for super fine sanding pads

#8

Abralon? *LINK*

Charlie Anderson

>Here's the link


Abralon

Re: Looking for super fine sanding pads

#9

Re: Same topic,Looking for super fine sanding pads

JohnKJordan in East TN

>>Do they make finer than 0000 steel wool?

Check for a discussion on this on the Flat Side in the last week or two. Evidently finer steel wool has at least been made at sometime in the past.

JKJ

Re: Looking for super fine sanding pads

#10

Bill Blasic

Re: Same topic,Looking for super fine sanding pads

Bill Blasic

>Abralon is very good and now being carried by Craft Supplies.

Re: Looking for super fine sanding pads

#11

Or buy Abralon from one of our own *LINK*

Charlie Anderson

>Steve Worcester has it on his website.


Turningwood.com

Re: Looking for super fine sanding pads

#12

Re: Or buy Abralon from one of our own

Steve Worcester

>I sell the regular sandpaper uo to 1200 and Abralon up to 4000.

Email steve@turningwood.com with and address and size (2" or 3") and I can send you some samples. (This is open to anyone wanting to try our product) = Steve

Re: Looking for super fine sanding pads

#13

Dick Hines

Re: Looking for super fine sanding pads

Dick Hines

>Check out Vince's woodnwonders. I know he has disk down to 600 but since I don't sand finer than 400 I have never checked.

www.vinceswoodnwonder.com

Re: Looking for super fine sanding pads

#14

Re: Looking for super fine sanding pads

Allen Neighbors

>Dial 1-800-USE-ENCO. Or try www.useenco.com

Gray Ultra Fine, pkg 20, #RP510-0415 $.89 ea.

White Super Fine, pkg 20, #RP505-6130 $.79 ea.

Re: Looking for super fine sanding pads

#15

Re: Looking for super fine sanding pads

Scott Hurley in N. VA

>Thanks to all who answered my question. I finally remembered (sometimes that's hard!!!) that I bought them from the same place where I bought Bush Oil. I Googled "Bush Oil" and found curiouswoods.com. They had just what I was looking for.

Scott