Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Personalized Wooden Watches, Engraved Free

Different tool

Posts

Different tool

#1

Different tool

Colin Spencer

>There was a thread recently about the point tool and I have one that I use with great success. I had another piece of 10mm HSS and thought that I would try a similar but different tool. I ground it using my Wolverine jig and belt sander. It is great for spindle work for cutting coves and is great as a scraper on either spindle or faceplate work. It can be used either riding the bevel or in scraper mode. I have not seen anything similar before but that is not to say that someone else hasn't already invented it.

If you have a suitable piece of steel give it a try and let me know what you think.


img

Re: Different tool

#2

Re: Different tool

Mike Nelson

>Good idea, I wonder how that would work with a flat top?

Re: Different tool

#3

Re: Different tool

Danny Wells

>I've been using one of those for several years that I made from 5/16" HSS rod. Yes, someone else invented it. I think Allen Beatty made it popular and one of the tool companies has been marketing it for several years as the "skewchigouge". I agree it works great for beads and coves and I use it as scraper as well.

Re: Different tool

#4

Mike Stafford

Re: Different tool

Mike Stafford

>Danny already identified it. I was taught to make my own skewchigouge by another turning friend. I must admit I have not used it enough to become proficient but for some operations it works great. I posted a pic of mine which is very similar to yours.


img

Re: Different tool

#5

Re: Different tool

Mike Cunningham (Cape May NJ)

>At Totally Turning in '06 I spoke with Keith Tompkins after one of his rotations where he used a tool that he made, similar to the one pictured but with the flat that you describe. Shortly after returning home I made my own and it works great for small detail work. Enco is a good source for the HSS blanks on the cheap.

Mike

Re: Different tool

#6

Inventor - Allan Beecham

Mike Brazeau

>I recently scanned an article describing the Skewchigouge and how to make it and use it from Woodturning Magazine No.53 June 1997. The creator of it, Allan Beecham is featured in the article. It is manufactured now by Crown Tools. I am running out of slots in my tool rack, but do want to try it one day. Have a piece of shock absorber reserved. The pdf file is about 5 mb if anyone wants it, drop me an email.

Re: Different tool

#7

Re: Inventor - Allan Beecham

john lucas

>I built one, tried it. It doesn't do anything a spindle gouge won't do. It's just as grabby when you try to do coves and I don't find that it turns beads any easier. Because the top is flat instead of curved like a gouge the cutting angle is steeper so it won't cut as clean. It is a decent tool and very easy to make. I now use mine to hollow christmas ornaments. I grind the top differently. Instead of going up hill from the tip mine go down in a negative rake. If you don't own a gouge this size and have the metal I'd give it try.

Re: Different tool

#8

Re: Inventor - Allan Beecham

Paul Zerjay

>I didn't care for my skewchigouge at all. I ended up making a 3 point tool out of it. I like this tool much better.

Re: Different tool

#9

Re: Different tool

JohnKJordan in East TN

>>Good idea, I wonder how that would work with a flat top?

For some time I've had a flat top version similar to that and although it looked like a good idea, I don't particularly like it compared to a detail gouge. Maybe I just haven't given it a fair chance. I may try grinding it into something else like a nice scraper.

JKJ

Re: Different tool

#10

Re: Different tool

Colin Spencer

>Thanks for all the comments. I had not seen the one done by Crown tools, as I said in my first post I was sure it wasn't new. I have ground the top this way as it makes it easy to sharpen with a diamond file and gives you a shear scraper when used horizontally. I haven't had any catches with it yet but I am sure they will come :-)

Re: Different tool

#11

Re: Different tool

john lucas

>Colin The tool does work much better if you polish the top edge. I think Crown suggests that with their tool. I polished the edge with diamond hones and a green stick on my buffer until it shined like a mirror. That makes it cut almost as good as a sharp spindle gouge. Then it gets dull just hit it with the ultra fine diamond hone and the green wheel and your back in business.

This is actually how I grind my miniature tools for doing the mini goblets. Mostly because I can't figure out how to put a groove in a .030" piece of steel. It works perfectly fine on the smaller work.