I use a pair of vise grips to help control torque
steve antonucci
>One size fits all...
S
Knowledge You Can Build On — Est. 1998
I use a pair of vise grips to help control torque
steve antonucci
>One size fits all...
S
Meant to be under Hunter post below
steve antonucci
>
Re: I use a pair of vise grips to help control tor
eaglesc
>What a coincidence
I use Vise Grips to hold the Carbide cutting tips I buy at HF when I am turning down brass and aluminum on my jet mini.
But then again I am not a turner,I only make pens
Re: I use a pair of vise grips to help control tor
georgetroy
>I also use vise grips on some of my tools, especially the hollowing tools. Also works for a large electrican drill bit as pictured. GT
Good Idea.
Eddie Pacheco; San Jose, Ca.
>Mine, below, is what happens when you get called to a friend's machine shop to pick up some drafting work, and have a left over bar of steel handy.
Re: I use a pair of vise grips to help control tor
Dick Hines
>It will work ok on drill bits but when useing Vice Grips on your hollowing tools wrap the shafts with masking tape tp keep the Vice grips from scaring the shafts.
I used to do is on my Keltons until I got the captured rig.