Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Have a question? Ask Woody!

Mike Schwing Which Lathe Are You Getting?

Posts

Mike Schwing Which Lathe Are You Getting?

#1

Mike Schwing Which Lathe Are You Getting?

Philip Morris

>Mike,

I saw in a previous post that you have a smaller lathe on the way.

I, too, may be facing downsizing in the near future and would be interested in learning which one you chose and why.

Thanks,

Philip

Re: Mike Schwing Which Lathe Are You Getting?

#2

Re: Mike Schwing Which Lathe Are You Getting?

Mike Schwing from Md.

>On the way is only slightly premature. Very soon would be closer. I am going to be buying two lathes, one large bowl lathe, probably the Vega 24 with the big motor, and a mini. The big lathe will have to reside in the garage until I get my shop built, which also means no real winter use. The mini will be in my basement workshop, which has room for all of my tools other than the tablesaw and jointer. (and a big lathe). I'm unsettled on the mini brand, but have had no problems using the various Jet minis I've encountered in classes and such, so it may be a Jet.

What are you thinking about?

Re: Mike Schwing Which Lathe Are You Getting?

#3

Re: Mike Schwing Which Lathe Are You Getting?

Sean Troy

>You'll love that Vega. I got to try one at Indy fest this year. Great footprint with stability.

Re: Mike Schwing Which Lathe Are You Getting?

#4

My Considerations (LONG)

Philip Morris

>Mike,

Thanks for the response.

I have narrowed my choice between the Jet 12" mini or the Nova 1624. I know that begs a few questions, so let me explain my reference to "downsizing".

Mine is more of a financial downsizing. I purchased a Oneway 1640 a couple years back. At the time, I was in a high paying, high stress corporate job and justified the purchase as a perk. Since then I have been diagnosed with some serious heart issues, which were being exacerbated by the high stress. I have since taken a much lower stress and lower paying government position.

I have some other financial commitments that can either be met by selling turnings or liquidating the Oneway and downsizing. My goal is to sell turnings, but since the job switch involved a 900 mile move, I am having to develop a new market for my turnings.

Historically, I have been a low volume turner (couple pieces per month) and sold turnings through word of mouth. Most of what I have turned has been smaller than the capacity of the Jet 12" mini. However, the larger pieces have always sold for much more (thus consideration of the Nova if I sell the Oneway). I am just not sure how long my heart condition will allow me to harvest the larger logs that correspond to the capacity of the Oneway or Nova. I have a follow-up in January with the cardiologist and will have a better idea then where things are going.

Thanks again,

Philip

Re: Mike Schwing Which Lathe Are You Getting?

#5

Mike Stafford

Re: Mike Schwing Which Lathe Are You Getting?

Mike Stafford

>Mike, I have not turned on the Vega but I did get to see Bill Grumbine demonstrate on one for several operations while he was at the NC Woodturning Symposium. Bill used it to turn several large bowls, small bowls, natural edge bowls and for coring and showed it no mercy. The Vega never whimpered or whined and seemed to be able to handle everything that Bill asked it to do. Looks like quite a machine to me for the money.

I also noted that Vega is in the process of developing a smaller machine that is more of a table top model but uses a similar design. It was on display in Greensboro but is a belt driven non-variable speed model. It looks like a great machine as well. Bill, for sure, would have more info about both if you are interested.

Re: Mike Schwing Which Lathe Are You Getting?

#6

Re: Mike Schwing Which Lathe Are You Getting?

Wally Dickerman in Arizona

>Mike, I'm happy to hear that you're getting a bowl lathe. It was my understanding tht you'd decided to give up serious turning. Apparently not. I felt bad about that because you are such a talented, innovative guy and you kept me wondering what far out thing you were going to come up with next.

Wally

Re: Mike Schwing Which Lathe Are You Getting?

#7

Re: Mike Schwing Which Lathe Are You Getting?

Tim GC

>I am glad to hear the time is approaching rapidly when this medium will again be graced by your stunning turning skill and imagination. I for one have missed the invasion of the board by your critters and bugs etc. Oh yeah and the occasional bowl!!

Re: Mike Schwing Which Lathe Are You Getting?

#8

Re: Mike Schwing Which Lathe Are You Getting?

Bill Hale / The Wood Spinner

>Hi Mike

You mention not being able to handle larger piece. of wood.

I had a very bad left wrist break a couple of years back and I can not lift pieces into the truck or on to the lathe. I resolved the problem with a small lift crane in the truck and I built a four leg gantry system for the lathe. The gantry is wood with barn door track for the required movement. I mounted a 1 ton chain fall on the cross bar and it works great. Total cost about $ 100.00 for the gantry and I think the lift crane was $ 50.00 or so from Harbor Freight. If you decide to do this be sure to ask me about mounting the crane.

If you would lile some pics just drop me a note.

billhale@woodspinner.net

Good turning and be safe

Bill in CG, AZ.