Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Good Hope Hardwoods - Walnut Slabs & Specialty Hardwood Lumber

Keyless Chucks

Posts

Keyless Chucks

#1

Keyless Chucks

George Van

>I am going to buy a new #2MT, 1/2" chuck for my lathe. I am looking at one at Woodcraft. Are there things I should be aware of when purchasing a keyless chuck? I will be using forstner bits in it up to 3". Will keyless chucks work for large size bits or am I better off purchasing a keyed type chuck? My chuck is old, 1940 vintage and is tired and not holding true any more.

Re: Keyless Chucks

#2

Re: Keyless Chucks

Carole Valentine

>George I don't know about that particular one, but I have one of the $30 or so ones and it does not run true. If I were you I would put a bit in there and test any one you are thinking about. The longer the bit the more obvious any wobble.

Re: Keyless Chucks

#3

Re: Keyless Chucks

Gary in Zirconia,NC

>I think that depends a lot on the quality of the chuck. I bought a good one and use it frequently on 3+ inch fostner bits with no trouble.

Re: Keyless Chucks

#4

Re: Keyless Chucks

john lucas

>I bought one at the AAW convention in Louisville. I don't remember who I got it from but it's excellent. I have also played with the one the Bestwoodtools sells and it is equal or even better. I haven't tried a 3" forstner but have used a 2" without problems.

Re: Keyless Chucks

#5

Re: Keyless Chucks *LINK*

George Van

>Thanks for the quick suggestions! I have heard of one from vmwoodworking1982@yahoo.com. I sent an email to him but have not heard back yet. The one from Woodcraft is $36.99.


Woodcraft Chuck

Re: Keyless Chucks

#6

Re: Keyless Chucks

Ruth Niles

>I bought that same one, John, it's great, I love it and I can't remember the guy's name either. He was at the Ohio show and I bought the larger one. Now I feel awful I can't remember his name because I'd like to recommend getting one from him.

Re: Keyless Chucks

#7

Re: Keyless Chucks

Carole Valentine

>Yeah, and you called me and asked if I wanted you to get me one and I stupidly said "No". Now I can't remember his name either.

Re: Keyless Chucks

#8

Re: Keyless Chucks

George Van

>Ruth, does VMwoodworking Keyless Chucks(Mike Hare ring a bell?

Re: Keyless Chucks

#9

He was a SWAT Symposium

George Van

>

Re: Keyless Chucks

#10

Re: Keyless Chucks

john lucas

>I believe it was Vince. I sure don't miss using a chuck key. The new breed of keyless chucks are excellent.

Re: Keyless Chucks

#11

THAT'S HIM!!!!

Ruth Niles

>Thank you, George, now I can sleep tonight. Please don't tell him I forgot his name, he even bought me coffee and a donut!

Re: Keyless Chucks

#12

Re: Keyless Chucks

George Van

>Thanks John, I think I will wait to see if he replies to my email. I sure like the idea of not having to look for the key.

Re: Keyless Chucks

#13

Re: THAT'S HIM!!!!

George Van

>Sleep sounds like a good idea Ruth, I think I am going to try some now that I have to wait for an answer to my email. I will get his, no sense taking chances with another brand.

Re: Keyless Chucks

#14

Re: Keyless Chucks *LINK*

Mike Cunningham (Cape May NJ)

>Hi George,

I have several, my favorite is a Rohm that I bought at Enco. I've used 2" forstners with no problems. There on sale right now, under $60. You'll need a MT adapter, they're only a few dollars.

Mike


Rohm @ Enco

Re: Keyless Chucks

#15

Best Keyless Chucks, Best Price ...

Ed Moore

>contact Mike Hare in Smyrna, Georgia. I have one of his and it has excellent accuracy at a low price.

Call: 770-434-9080

Highly recommended,

Ed

Re: Keyless Chucks

#16

Re: Keyless Chucks

George Van

>Thanks Mike, I will look at your link.

Re: Keyless Chucks

#17

Re: Best Keyless Chucks, Best Price ...

Gary Evans Tallassee, TN

>One more recommendation for Mike Hare. He sells a high quality chuck for a low price, and includes the MT adapter to fit your lathe.

Plus, he's just a real nice guy. We've spent many hours shmoozing at the various symposia.

Gary