Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Need a tree taken down or milled?

Pics

Posts

Pics

#1

Pics

Bill Hale / The Wood Spinner

>Hey Ellis

Is there a chance that you could make the Pics larger ? Thumbnails are ok but the expanded is a little small. Maybe extra 540%

Thanks Bill

Re: Pics

#2

Re: Pics

JohnKJordan in East TN

>Bill,

I'm not even Ellis but it was my understanding the pictures would be displayed at the size at which they are uploaded. I don't know if this has changed recently. For a test, I'm attaching one of my panoramas reduced to 1000 pixels wide.


img

Re: Pics

#3

Re: Pics

JohnKJordan in East TN

>Here's another test, even wider.

(BTW, to get these photos I had a computer-controlled camera mounted on a tall pole and made a series of panoramas to document a huge neutron science construction project.)


img

Re: Pics

#4

Pretty cool pictures, John.

Eddie Pacheco, San Jose, Ca.

>Is this with a commercial computor controlled rotary table or something you and your staff put together?

Re: Pics

#5

good clean fun *LINK*

JohnKJordan in East TN

>>Is this with a commercial computor controlled

>rotary table or something you and your staff put together?

Thanks. The project was the Spallation Neutron Source (SNS) built at Oak Ridge National Lab in TN.

This was a commercial unit, controlled by ethernet. It contained an off-the-shelf digital camera and tilt-pan in an industrual weatherproof housing. We programmed it to take a series of images at fixed interesting locations every few minutes and I used that to create time-lapse video of the construction. We also mounted four non-motion cameras on poles and established a number of fixed camera positions on the ground to get a variety of other viewpoints.

Every hour the primary camera was programmed to sweep 360 degrees and take a series of 18 overlapped photos. What was tricky about creating the panoramic photo was the camera was by necessity angled down instead of horizontal. Properly stitched resulted in the photos in an arc due to the perspective rather than a line so I used special features in Panotools to warp the images back to horizontal. The stitching by Panotools was reasonable, but not good enough for me. (We printed these 10' long and they were viewed up close.) I ended up doing the fine stitching in Photoshop (using masks and a lot of painting) which resulted in 300+ MB files. The final panos were about 12000 pixels across. It took me about 12 hours to do each panorama and I think I did 6 or 8 over the course of several years. The file, BTW, also worked great for interactive viewing with QuicktimeVR.

I also used the panos and other pictures from the cameras in a series of videos which documented the project. If you are interested, one of the construction videos is in the link below. It pans through one of the panoramas near the end and includes some time-lapse segments, some simple animation I did, and a whole bunch of photos! A partner and I did one of these videos every six months for several years - he did the actual video editing and music and I did everything else from some of the aerial photography to all of the photo processing, organization, and directing. Good clean fun!

(If you back up one level in the link, there are some more videos. One short video, the SNS Virtual Tour, is all from animation I did to describe the project before anything was built. BTW, the thing is up and running now - it was a good time to retire.)

JKJ


construction video by JKJ

Re: Pics

#6

Didn't You

Barbara Gill, Remlik VA

>make that neat pumpkin video?

Re: Pics

#7

Re: good clean fun

Bob Macgregor

>Learn something new everyday; I don't think I ever knew there was such a thing as an anion of hydrogen ("negative hydrogen ion")? I sure hope this improves my gouge technique!

Great photojournalism there.

Re: Pics

#8

Re: Didn't You

JohnKJordan in East TN

>>make that neat pumpkin video?

Yes, I did the pumpkin video about 20 years ago while home one day with the flu. I think that experience was one thing that got me interested in persuing video work. But these days, I'd rather feed goats and turn wood!

JKJ