Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Support WoodCentral when buying things you need

Money and a Woodturning Hobby.....

Posts

Money and a Woodturning Hobby.....

#1

Money and a Woodturning Hobby.....

Wally Dickerman in Arizona

>I'm considering buying a new lathe and a new bandsaw. Both pretty pricey. I got to thinking about whether or not I could justify the cost to support a hobby. Well, I make money every year by selling my work and by teaching woodturning. But wait a minute....I've been selling my work for aver 20 years and teaching for almost that long. So multiply that yearly figure by 20...I'm amazed!!.. It's into 6 figures!! I refigured it...yep, I actually took in all of that money with my hobby. Okay, so I guess that I get to buy a new lathe and a new bandsaw.

For many years I had a couple of other hobbys. Boating and golfing. I sure didn't make any money on them!!

Wally

Re: Money and a Woodturning Hobby.....

#2

Which Lathe Wally?...

Barbara Gill, Remlik VA

>

Re: Money and a Woodturning Hobby.....

#3

Hobby?

Richard Jones

>Hobby? SWMBO says it's an obsession bordering on a disease..........

And yes, you're worth it and deserve it. Let us know what you get.

Rich

Re: Money and a Woodturning Hobby.....

#4

Re: Money and Woodturning

Allen Neighbors

>Money and Woodturning are inseparable! Good thinking, Wally, go for broke... well... not until you are broke... but go for it!

If I live as long as you have and still turn wood, I'm gonna spend like it's going out of style. Hmmmm... I already do that. :)

Let us see the pics, Wally. Have fun!

Re: Money and a Woodturning Hobby.....

#5

Re: Which Lathe Wally?...

Wally Dickerman in Arizona

>A Oneway 2416 and a Laguna 16 in. Bandsaw. I turn lefty, so I'll turn lefty on the outboard side just as Phil Brennion and others do. The Oneway faceplate/chuck locking system allows you to do that safely. I turned lefty on the OB side of a Delta then a General 260 for years before I got my LH Nichols lathe. (Anybody want to buy an 800 lb 26 in. swing lefty Nichols?)

Wally

Re: Money and a Woodturning Hobby.....

#6

Re: Money and a Woodturning Hobby.....

john lucas

>How much went back out? I use the same logic you do when I need to purchase a new tool but of course I didn't count all the money I spent on new tools up to this point. Of on wood, glue, finish,sandpaper. I do try to make my hobby pay for itself however. I just bought the new Baxter threading machine and it's almost paid for itself.

My Smithy lathe mill has yet to pay for itself but it has saved me money and I've made a few dollars with it.

Basically what we are saying is that we use the same kind of financial bookkeeping that NASA uses to justify it's expenses.

Re: Money and a Woodturning Hobby.....

#7

Re: Money and a Woodturning Hobby.....

Wally Dickerman in Arizona

>John, I use net figures. I keep records for tax purposes so expenses are figured in. Sometimes cash sales don't get into the records..Shhh, so the amounts are actually a little low. John, 20 years is a long time.

Wally

Re: Money and a Woodturning Hobby.....

#8

Re: Money and a Woodturning Hobby.....

john lucas

>Wally I can't believe how fast the last 20 years has gone and I'm not anywhere near your age. Seems like yesterday I was just thinking about having a son and now he's half way through his first year of college.

Re: Money and a Woodturning Hobby.....

#9

Re: Money and a Woodturning Hobby.....

Barry Irby

>John, if you actually THOUGHT about having a child and then went ahead and had one, you must have lost your mind. Insanity is hereditary, you get it from your kids.

Of all the things I've had and lost, I miss my mind the most.

Now that you know where yours went, Don't thank me.

Re: Money and a Woodturning Hobby.....

#10

Mike Stafford

Just trying to break even...

Mike Stafford

>I have never imagined that my hobby would turn into a profitable venture. I make some money at the end of the year but when I run the balance sheet I am just happy if I am able to replace the wood, pay for new tools and take a class now and again. I figure if my woodworking/woodturning hobby pays for itself I am an unmitigated success.

But in my case I knew that when my wife let me bring my first piece in the house and display it.

If she is happy and I am enjoying what I do then all is well in my world. I have no illusions of grandeur.

Re: Money and a Woodturning Hobby.....

#11

Re: Money and a Woodturning Hobby.....

Bill Grumbine (Kutztown PA)

>Wally, around here we have a saying. It's cheaper than a bass boat! Good luck looking for a new lathe and saw. Or do you have them in mind already?

Bill

Re: Money and a Woodturning Hobby.....

#12

Re: Money and a Woodturning Hobby.....

Troy German

>My previous hobby was internet poker. Let me tell you, wood turning is a lot MORE expensive than poker. In fact, I might have to take up poker again just to pay for this habbit. No I won't. Turning may cost more, but it's more rewarding.

Troy

Re: Money and a Woodturning Hobby.....

#13

Uh, Troy, that's not a hobby that's an addiction.

Eddie Pacheco, San Jose, Ca.

>Wait a minute, hmm, I guess that can also be said about woodturning. Nevermind.

Re: Money and a Woodturning Hobby.....

#14

Re: Which Lathe Wally?...

Carol - now in NC Nebraska

>How much are you asking? Or reply privately if you wish. As you know I can turn either way.

Re: Money and a Woodturning Hobby.....

#15

Re: Which Lathe Wally?...

Bill Hale / The Wood Spinner

>Hey Wally

Why do you say a 24 x 16 and not a full blown 24 x 36 var. 3 hp. ?

Bill in CG, AZ.

Re: Money and a Woodturning Hobby.....

#16

Re: Which Lathe Wally?...

Wally Dickerman in Arizona

>A couple of reasons Bill. When I got the Nichols about 10 years ago I had in mind turning some big stuff. Well, I did for awhile but now I seldom turn anything bigger than 12 in. dia. and 14 or 15 inches deep. Another very good reason is that my shop is quite small and I simply don't have room for a long bed along with an outboard bed. Here in Green Valley we have a wonderful community workshop with 7 Woodfast lathes, some longbed. So if I have need of a long bed lathe, and I seldom do, it's available. I teach classes there.

When I lived in Puget Sound country we had a 45 foot powerboat and we lived aboard for awhile. The galley was very complete but small. My wife called it a one butt galley. Well, my shop is about a two butt shop.

Wally

Re: Money and a Woodturning Hobby.....

#17

Not all addictions are created equal.

Troy German

>

Re: Money and a Woodturning Hobby.....

#18

Re: Uh, Bill, these days almost everything .....

Jamie Donaldson

>.... is less expensive than a bass boat, and Mike, the expression is "delusions of grandeur!"

Re: Money and a Woodturning Hobby.....

#19

Re: Money and a Woodturning Hobby.....

JohnKJordan in East TN

>I find turning more expensive than white water kayaking, but cheaper than weekend flying, and WAY cheaper than cave diving. (Anybody interested in a dry suit and a couple of sets of double tanks?)

But one thing that makes woodturning attractive to me is you can work on it an hour or so at a time, any time of the day.

JKJ

Re: Money and a Woodturning Hobby.....

#20

Mike Stafford

Re: Uh, Bill, these days almost everything .....

Mike Stafford

>My delusions have illusions....I have deluded myself, Jamie.

Re: Money and a Woodturning Hobby.....

#21

Dick Hines

Re: Money and a Woodturning Hobby.....

Dick Hines

>You got that right Bill. I have one for sale if you know anyone who wants to take up bass fishing.

Re: Money and a Woodturning Hobby.....

#22

Re: Which Lathe Wally?...

Ron in Drums PA

>Teknatool will be selling inserts with a locking system. I picked up a few for my new lathe.

Re: Money and a Woodturning Hobby.....

#23

Re: Uh, Bill, these days almost everything .....

Dennis @Prescott,Az.

>Go with a mm16 band saw

Re: Money and a Woodturning Hobby.....

#24

Re: Money and a Woodturning Hobby.....

Barry Turner

>Compare the cost of your new lathe and new bandsaw to the price of a new bass boat, motor and trailer. Oh, and a new truck to tow it with. Go buy yourself a new lathe and bandsaw and enjoy!

Re: Money and a Woodturning Hobby.....

#25

Re: Money and a Woodturning Hobby.....

Wally Dickerman in Arizona

>Bass boat and motor?...I was into boating for years. Not fishing but cruising. After retirement we cruised from Puget Sound north toward Alaska on the inside passage every summer for years. Our last boat was a 45 foot twin deisel power boat and we lived aboard. I'm glad that I'm not buying fuel for it nowadays.

Wally