Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Personalized Wooden Watches, Engraved Free

Faceplate and thread problems

Posts

Faceplate and thread problems

#1

Faceplate and thread problems

Scott Walton

>Hello all,

I'd like to know any ideas to a problem I have. I need to make some larger platters on my old Craftsman's lathe. My problem is, the out bound side of the lathe is a 3/4" 16... yes, somewhat standard I know but it is a left hand thread! I have seen the LH threads for 1"-8 but not 3/4"-16.

If anyone knows of an attachment that is a 3/4"-16 (left hand thread)female, to a 1"-8 right hand male adapter so that I could use my chuck...!

I have tried the Sears part and service centers but they no longer have these parts of even 3/4"16 LH face plates for that matter!

Any ideas would be appreciated!

Re: Faceplate and thread problems

#2

Denis Putland

Re: Faceplate and thread problems

Denis Putland

>Hi

If you do a search such as "left hand 3/4 thread" you will come up with sites that sell that type of threaded nuts. you then can make your own face plates.

For a more accurate face plate have a friend who is a machinist make you one.

Denis

Re: Faceplate and thread problems

#3

Using a chuck on the outboard side...

Clem Wixted

>...might require that you have a way to secure the chuck to the outboard spindle/adapter, if it's a right hand thread. Some chucks have a screw or screws that secure the chuck to the spindle so it doesn't spin off when you turn.

Clem

Re: Faceplate and thread problems

#4

Re: Faceplate and thread problems

john lucas

>Scott if you find a right hand faceplate check the threads. They often made their faceplates with both threads in them. It's easy to tell. When you look inside it looks like an X pattern instead of the usual thread appearane.

Re: Faceplate and thread problems

#5

Re: Faceplate and thread problems

Bob Macgregor

>I got lucky and my cheap monotube lathe came with an "IN/RH" and an "OUT/LH" faceplate.

Good luck finding a fix or fixture for yours.

Re: Faceplate and thread problems

#6

Re: Scott, be sure and post....

Allen Neighbors

>how you solved the problem. I would like to find something with 3/4x16 LH threads, also. :)

Re: Faceplate and thread problems

#7

Oneway...

Peter Teubel

>Contact Oneway. They custom make adapters for almost any lathe/situation.