Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Reach the woodworkers who ACTUALLY BUY

Wolverine sharpening jig

Posts

Wolverine sharpening jig

#1

Wolverine sharpening jig

Brian

>I'm setting up my jig and realized too late that the instructions state: "The base must be not less than 1/2" from the front of the mounting board."

Before I go resetting my grinder on the spacer board, I thought I would inquire if it really "must" be less than 1/2". I'm anticipating the answer but can't fathom why it would be an issue with the operation of the jig.

These directions are poorly written. They are grammatically ok, but just don't bring you from beginning to completion in a direct line. Oh well.

Thanks

Re: Wolverine sharpening jig

#2

Re: Wolverine sharpening jig

Doug Thompson near Cleveland

>If it works, use it. The most important thing to look at is the base to the centerline of the wheel but you have a spacer under the grinder so you have that.

Re: Wolverine sharpening jig

#3

Re: Wolverine sharpening jig

Brian

>Thanks. It turns out I don't need a spacer board to get to 6.25". I'll start over and do it right with one mounting board for the grinder and the jig.