Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Have a question? Ask Woody!

What does a bowl turner want?

Posts

What does a bowl turner want?

#1

What does a bowl turner want?

Ron Bauman

>I was talking with the guy I buy a lot of my lumber from; he has a small mill near me. He has a small amount of short logs some of which I'm interested in, but a lot that just sit around. I suggested that he cut them for turners, but to be honest I wasn't able to tell him how to go about it. Now, knowing that the readers of this site always talk about getting their supplies here and there, I wondered what to tell him to do. Do you want the biggest cut, the ends painted, waxed, a log halved, quartered, etc, etc. I'll supply him with your answers, and he and I both thank you.

Re: What does a bowl turner want?

#2

Re: What does a bowl turner want?

Allen Neighbors

>I like mine at least squared and waxed. I also like a lot of mine in half log. Then I can cut the bowl blank myself, and do them to suit me.

If he rounds them, he makes the decision what you'll turn.

Re: What does a bowl turner want?

#3

Re: What does a bowl turner want?

ThomD

>He needs to look for the bowls in there. If the outside of the log is smooth and round, then I mostly want the bowl outside to follow the bark. So you can just split the log in half, no longer than it is wide, and maybe cut a little flat on the outside, or not. On something like a burl, the turner may want the rim of the bowl to follow a outside of the log, and possibly want quarters rather than halves.

Most turners want nice wood, not bland. They want burls, crotch, bug marks, etc... in some operations those bits are just shovelled to a dump. Often what might just look like a fault, beause it is too small to be attractive in a board, can be high quality figure when cut for a bowl.

The best thing might be to contact a turner who is familiar with cutting wood and have him show up to explain the cuts. Maybe he could bring a few bowls.

Re: What does a bowl turner want?

#4

Peter Charles Fagg (UK)

Re: What does a bowl turner want?

Peter Charles Fagg (UK)

>In general terms what I would like in any timber of any tree is the diameter plus 4 inches in length and split or sawn lengthwise.

The extra 4 inches gives me an allowance to lose 2 inches (Approx) from each end as scrap that is usually the section that has cracked.

Apart from this I have no other requirements.

As to it being interesting grain or otherwise, it makes little difference, my experience of those selling logwood for turning, usually reduce the price for bland timbers. We all know how much lovely decoration can be added later!

Regards, Peter.

Re: What does a bowl turner want?

#5

Re: What does a bowl turner want?

Barbara Gill, Remlik VA

>Ron, I cut many blanks on my Wood-Mizer, both for my use and to sell. I think if you give the sawyer a list of some sizes and figure desires as well as letting him(her) know about removing the pith, etc. If he wants, I would be glad to talk to him about how I cut blanks from both small and large logs on the mill. If he is interested, e-mail me for telephone number.

Re: What does a bowl turner want?

#6

Re: What does a bowl turner want?

Jim King

>I think you can say that for the most part a turner wants everything that a flat board person throws away. Knots, twisted grain, burls with bark and holes, worms, strange colors , any wonderful defect is good.

Re: What does a bowl turner want?

#7

Steven Antonucci

I had the same conversation with my local mill

steve antonucci

>The issue is that unless the guy is looking to bring his goods to a market other than his local market, the value of the logs isn't much. Think about it. Most turners in your area will have access to the same trees and wood types as he does, and we're generally a pretty frugal bunch.

I made the same offer to my local mill guy about 8-10 years ago when people were starting to offer bowl blanks on Ebay. I was going to "get him started" with the bowl blank business (vs. survey stakes...boring!) and he politely declined because he didn't see the market. If you live in the Northeast, you can't possibly imagine anyone paying for maple dipper in wax!

Now, I just take his crotch cutoffs that are too big to pass through his 30" bandsaw... :-)

Steve

Re: What does a bowl turner want?

#8

Re: What does a bowl turner want?

Walter Ahlgrim

>Have him look at EBay seem to be a thriving market Search �turning blank� I found 500 items every item under $20.00 had a bid. Cut them square 2 to 4 inches thick, label with size and species then wax all sides and dry the wood. If I am buying wood I want it to be dry.