Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

This is the most versatile work station you will ever use

Signing your work with some heat............

Posts

Signing your work with some heat............

#1

Signing your work with some heat............

Richard Jones

>I have a Cub Woodwriter with the Razortip ball stylus pen attachment. While not necessarily displeased with the results for my signature, I wonder if someone knows some tips on how to do this a bit cleaner. A slow, steady method with less heat seems to work better than high heat and moving fast............ Also, endgrain seems to be more difficult to sign cleanly, altho' I guess that's obvious..........

Thanks.

Richard Jones

Rice, VA

Re: Signing your work with some heat............

#2

Re: Signing your work with some heat............

john lucas

>I have never been able to consistently sign my name really clean with a wood burner. That's why I use the Dremel engraver mostly. I like the ball shaped writing tip from Optima and play with the heat. I find 2 things that helped me the most. One was to sand to a fairly fine grit on the surface that needs signing. This seems to help the heat transfer more evenly. The other is to use a little lower heat and then sign with a very controlled movement which takes practice.

I'll sign a bunch of work and think I have it down pat and then pick up the next piece and it will burn inconsistently from the summer to winter wood or the heat will be wrong and burn a thick line as you start. So I think the trick is to keep a sample of the species your signing handy so you can make any necessary adjustments to heat or signing pressure before you ruin the good piece.

Re: Signing your work with some heat............

#3

Re: Signing your work with some heat............

Andi Wolfe

>The smaller the surface area of the tip, the easier it is to use for signing. If you are using anything but the micropoint writing tip from Razortip, your result won't be very satisfactory.

Turn the heat way down, go slow, and remember that you are not signing your signature as if you were using a writing implement. You have to carve your name into the wood. That means you'll hold the woodburning pen differently than you would a pencil or pen.

Re: Signing your work with some heat............

#4

ebd

Re: Signing your work with some heat............

ebd

>I haven't had trouble signing my name with a wood burner since I adopted the following method. First, I use one of those large magnifiers on an adjustable arm because my eyes arn't all that good. I also have a light on an adjustable arm for the same reason. The main thing that makes it easy is that I don't try to sign with the burner. I sign first with a pencil. Then I burn the signature in. Every stroke should be down and toward you, never away. My Dad went to art school in his youth and that is how they taught him to work with india ink. For example, on a circle you would start at the top and do the left side top to bottom then go back to the top and do the right side top to bottom (hope that's clear). On wood where the summer and winter wood vary in hardness you need to make light strokes and go over them multiple times.

Re: Signing your work with some heat............

#5

John...............................et al..........

Richard Jones

>John,

Is there more than one Dremel engraver? Does it only have one tip?

Thanks,

And I appreciate all the responses, guys, thanks..............

Rich

Re: Signing your work with some heat............

#6

Re: Signing your work with some heat............

don central illinois

>I don't do any pyrography, yet, but that is one of the simplest ideas I've heard here in a long time. Just sign in pencil and then burn in the lines. Sometimes we try to make the simplest ideas a lot more complex than needed. Man, I love this forum, new updates and all.